Razor E325S Manual Do Utilizador

TROUBLESHOOTING GUIDE

Need Help?

Need Help? V

Visit

isit our web site

our web site for updates and a list of authorized service centers

for updates and a list of authorized service centers at

www.razor.com

or call

call ttoll-free at

oll-free at

866-467-2967

866-467-2967 Monday - Friday 8:00 AM -

Monday - Friday 8:00 AM - 55:00

:00 PM

PM Paciﬁ c

Paciﬁ c T

Time.

ime.

Sometimes the scooter

doesn’t run, but other

times it does

Charger gets warm

during use

Scooter does not stop

when applying the brake

Scooter makes loud

noises or grinding

sounds

Problem

Possible Cause

Solution

Brakes are not adjusted properly

Loose wires or connectors

Motor or electrical switch

damage

Normal response to charger use

Brakes are not adjusted properly

Chain is too dry

Brake rotor is dragging on brake

pads

Refer to adjusting the brakes instructions on page 4.

Check all wires around the motors and all connectors to make sure

they are tight.

Contact your local Razor authorized service center for diagnosis and

repair.

No action required. This is normal for some chargers and is no cause

for concern. If your charger does not get warm during use, it does not

mean that it is not working properly.

Refer to adjusting the brakes instructions on page 4.

Apply a lubricant such as 3 in 1

or Tri-Flow

to the chain.

Use your ﬁ ngers to twist the caliper adjuster in either direction until

rotor is centered between pads.

E_Series_Manualv10.indd 13

3/10/06 2:11:11 PM