Husqvarna 390XPG Manual Do Utilizador

English

 –

 21

Push in the choke control as soon as the engine fires and 
make repeated starting attempts. Immediately press and 
release the throttle when the engine starts. That will 
disengage the throttle latch.

As the chain brake is still activated the engine must return 
to idling speed as soon as possible by disengaging the 
throttle latch in order to avoid unnecessery wear on the 
clutch assembly.

Note! Pull the front hand guard towards the front handle. 
The chain brake is now disengaged. Your saw is ready for 
use.

•

Never start a chain saw unless the bar, chain and 
clutch cover are fitted correctly. See instructions under 
the heading Assembly. Without a bar and chain 
attached to the chain saw the clutch can come loose 
and cause serious injury.

•

The chain brake should be activated when starting. 
Se instructions under the heading Start and stop. Do 
not drop start. This method is very dangerous 
because you may lose control of the saw.

•

Never start the machine indoors. Exhaust fumes can 
be dangerous if inhaled.

•

Observe your surroundings and make sure that there 
is no risk of people or animals coming into contact 
with the cutting equipment.

•

Always hold the saw with both hands. The right hand 
should be on the rear handle, and the left hand on the 
front handle. All people, whether right or left handed, 
should use this grip. Use a firm grip with thumbs and 
fingers encircling the chain saw handles.

The engine is stopped by pushing the stop switch to the 
stop position.