Omron Healthcare NE-C28 Manual Do Utilizador

15

5. Turn the power switch off.

The power switch is in the       position. The 
compressor turns off and nebulization stops.

6. Disconnect the Air Tube from the Nebulizer Kit. Hold the Air Plug and 
gently pull down to disconnect the Air Plug from the Air Tube 

Connector on the bottom of the nebulizer kit.

7. Check the Air Tube. No condensation or moisture should remain in the 

Air Tube.

Do not store the air tube with moisture or medication remaining in the air tube. 
This could result in infection as a result of bacteria. 

If any condensation or moisture remains in the air tube, remove the 
moisture from the air tube. Follow the directions below:

1. Make sure the Air Tube is still connected to the Air connector 

on the front side of the compressor.

2. Turn the power switch on. The power switch is in the (l) 

position. The compressor will start and pump air through the air 

tube to expel the moisture.  

3. Turn the power switch off. 

8. Disconnect the Air Tube from the compressor.  Hold

the Air Plug and gently pull the Air Plug off the Air 
Connector on the front side of the compressor.

9. Unplug the device from the electrical outlet.

Unplug the power cord from the electrical outlet after 
using the device. 

NE-C28- IM Final 6-8-06  6/8/06  2:21 PM  Page 14