Pioneer DBR-T200GB Manual Do Utilizador

<BRB1056>

If you are having trouble with the digital receiver, check the following items to see if the problem
can be resolved. Sometimes another device is at fault, so be sure to also inspect the other devices
being used. If the trouble still cannot be resolved, contact your nearest PIONEER authorised service
centre, the dealer where you purchased the digital receiver or ONdigital.

No sound, no picture, and no 
front-panel display.

No sound and no picture, but 
the front panel is displaying 
"--:--."

No sound and no picture, but 
the front panel display is cor-
rect.

Only the Main menu, its sub-
menus, and the information 
bar are available. Service se-
lection is not possible.

• The receiver is not plugged in-

to the main power supply or is 
not turned on.

• The receiver is in standby.

• Non-digital television is being 

viewed via the UHF aerial TV 
connection.

• The SCART lead is connected 

to the wrong sockets.

• The connections are correct 

but the TV is not switched to 
an external AV source (AV1 or 
EXT 1, etc.).

• The connection cables might 

be defective (corroded, bro-
ken, or damaged) or missing.

• A download list of (digital) 

services is not stored in the 
digital receiver's memory.

• The digital receiver is not cor-

rectly set up for the aerial.

• The aerial is not receiving the 

signal.

• The transmitted signal is too 

weak.

• Check the main power sup-

ply connection. Press the 
ON/OFF button on the front 
of the receiver.

• Press one of the remote con-

troller number buttons to 
wake up the digital receiver.

• Press the remote controller 

TV/DTV button.

• Check the SCART connec-

tions.

• Check the TV SCART con-

nections.

• Check all connections.

• Follow the relevant installa-

tion instructions contained 
in the section 
"CONNECTIONS".

• Check if the analogue chan-

nels are received properly 
and then check the aerial 
connection (aerial to DBR-
T200GB, and TV aerial input 
connected to DBR-T200GB 
UHF input). Refer to section 
"Signal Strength" on page 
49.

• Check the aerial installation 

and positioning.

• Check the aerial installation 

and positioning or install a 
larger aerial.

In unusual cases, the effect 

can be caused by severe 
weather or very heavy cloud 
cover.