Toshiba EO1-31001GE Manual Do Utilizador
14. OPERATING PROCEDURES
14.2 FIX PRICE OPERATION (FOR US TYPE ONLY)
14- 2
14.1 WEIGHING OPERATION
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH
Mode: WEIGH
The weigh mode is used to weigh a commodity and to issue the label. The label contains data such as a weight,
unit price (price per weight) and total price (calculated as a result of the weighing operation). The following is a
basic operation seen at the sales floor of a store or at a back room where different kinds and weights of
commodities are repacked. Pressing the [VOID] key subtracts the last entry from the memory.
Example) When PLU #100 and an unit price of $8.00 are set in the speed key #12.
unit price (price per weight) and total price (calculated as a result of the weighing operation). The following is a
basic operation seen at the sales floor of a store or at a back room where different kinds and weights of
commodities are repacked. Pressing the [VOID] key subtracts the last entry from the memory.
Example) When PLU #100 and an unit price of $8.00 are set in the speed key #12.
NOTES:
1. Pressing a speed key to which no PLU data has been assigned will result in an error.
1. Pressing a speed key to which no PLU data has been assigned will result in an error.
In this case, press the key, then press a speed key to which PLU data has been assigned.
2. To change between AUTO and MANUAL, follow the procedure provided in section 14.9.
3. If a unit price exceeding 4 digits is obtained by multiplying by 2 or 4 (when pressing the key or
3. If a unit price exceeding 4 digits is obtained by multiplying by 2 or 4 (when pressing the key or
key), the unit price will be 0.
4. key is available only when the scale is a kg scale or operated on kg base.
5. When the , or key is pressed, the unit price does change on the display.
6. When the “compulsory tare” is selected, a tare must be subtracted in a weighing operation, otherwise an error
5. When the , or key is pressed, the unit price does change on the display.
6. When the “compulsory tare” is selected, a tare must be subtracted in a weighing operation, otherwise an error
message “TARE REQUIRED” will be displayed when the following operation has been done:
①
①
Manual mode: Pressing the key.
②
Auto mode: Placing a commodity on the platter.
③
Floating vendor mode: Pressing the key.
When a “TARE REQUIRED” is displayed, refer to Section 14.6 to follow the proper weighing procedure.
Enter the PLU #.
Press the
speed key.
speed key.
Place a commodity
on the platter.
(Ex. 1.000 lb.)
on the platter.
(Ex. 1.000 lb.)
The label is issued
The unit of measure can be changed
for CA model only.
for CA model only.
LB
↔
kg
Available only when the initial
setting # 5-6 is set to 1.
setting # 5-6 is set to 1.
: AUTO
MANUAL :
Press when canceling
the last sales.
the last sales.
Press :
C
1
0
0
PLU
12
LB
kg
kg scale
lb scale
VOID
1/2 lb
1/4 lb
100 g
1/2
1/4
100 g
(Sample label)
PRT
*
1/2 lb
1/4 lb
100 g
PRT/*
Vendor
<REG.> MANU. WEIGH
T-BONE STEAK
T-BONE STEAK
lb
UNIT/$
TOTAL $
1.000
8.00
8.00
TEC STORE
(TEL) 0123-45-6789