Datalogic Scanning D8330 Manual Do Utilizador

POWERSCAN

®

 D8330/M8300 

 
For readers that have the Sleep state enabled, this timeout determines when the 
reader will enter this state. 
 
 

 

 
This mode determines how the reading phase is controlled when the hardware 
trigger operating mode is selected: 

•  trigger active level: the reader goes ON when the trigger is pressed and goes 

OFF when it is released 

•  trigger active pulse: the reader goes ON at the first trigger press and goes OFF 

only at a second press 

 
 

 
When enabled, it activates a "click" sound upon each trigger pressure. 
 
 

 
When this timeout is selected, the reader turns OFF automatically after the desired 
period of time. 
 
 

 
In general, a reading cycle corresponds to the ON + OFF times of a device. 
The resulting effects of this parameter on code reading depend on other related 
configuration conditions. Here are the definitions of ON and OFF times. 

 

•  For readers using the software trigger parameter (FLASH MODE), a reading 

cycle corresponds to the flash on + flash off times. Code reading takes place 
during the flash on time. 

•  For readers using the hardware trigger parameter, a reading cycle corresponds 

to a trigger press (ON) + one of the following OFF events: 

trigger release (for trigger active level) 
a second trigger press (for trigger active pulse) 
trigger-off timeout (see par. 5.6.3).