VIZIO ISGB03 Manual Do Utilizador

31

To use a Bluetooth accessory with your Stream Player, you need 

to pair it with the Stream Player. 

To pair your accessory:

1.  Make sure your accessory is in “discoverable” mode.

2.  Press the V Button on the remote.

3.  Select Devices and use the remote to navigate to Bluetooth.

4.  Select Pair device. The Stream Player will scan for your 

accessory. 

5.  Select your device from the list to pair it with the Stream 

Player. 

 

 

 

 

If you are listening to bluetooth headphones and 
there is no sound, press the V Button and navigate 
to Settings > Audio  and change the HDMI Out 
setting to PCM. 

Connecting USB Devices
To use a USB accessory with your Stream Player, connect it to the 

USB port on the back of the device. 

When removing a USB storage device, it is important to unmount/
eject the drive to prevent damage and/or data loss.

To unmount/eject your USB storage device:

1.  Press the V Button  on the remote. 

2.  Use the Arrow buttons or the Trackpad to select the 

icon 

at the top right-hand corner of the on-screen menu, then 
press OK.  
 
If the notifications are not displayed, select Ongoing to open 
the notification list. 

3.  Use the Arrow buttons to highlight the name of your USB 

storage device and press OK. 
 
Your device is ejected. It is safe to disconnect the device. 

To disconnect your Bluetooth accessory,

1.  Press the V Button on the remote.

2.  Select Devices and use the remote to navigate to Bluetooth.

3.  Select your device from the list of paired accessories and 

use the remote to switch the device pairing to Off. 

You may need to re-pair your bluetooth device after 

a period of non-use or once it has been powered off.