Alliance Laundry Systems 602004144 Manual Do Utilizador

Operating Instructions

70400101 (EN)

IMPORTANT: To stop the tumble dryer at any

time during the cycle, OPEN DOOR. If the loading

door or lint panel door is opened during the cycle,

the heating system will shut off and the motor will

stop. To restart the cycle, both doors must be closed

and the START button must be pressed in.

If the load cools to 90°F before cool down time

expires, the control will flash “Lr” (load ready) in the

heat time display. If the door is not opened, the tumble

dryer completes the selected cool down time. If the

door is opened after reaching “Lr” temperature, the

cycle will be terminated.

NOTE: If display show an error code, refer to

Error Codes section.

5. When the cycle is complete, open door and

remove the laundry. Anti-wrinkle feature will

tumble the load without heat for 30 seconds

every 2 minutes for 1 hour OR until the loading

door is opened.

NOTE: This machine includes an anti-wrinkle/

extended tumble feature. After the drying cycle is

complete, the cylinder will tumble without heat

every few minutes. The intermittent tumbling will

continue for one hour or until the door is opened.