Zebra Technologies P1061668-001 Manual Do Utilizador

Kiosk Modifications of the OLE for Retail POS
Methods

P1061668-001 Rev. A

OPOS Driver User Guide

11/25/2013

Call to print a barcode on the specified printer station.

If the property RotateSpecial indicates that the barcode is to be rotated, then perform the 
rotation. The Height, Width, and TextPosition parameters are applied to the barcode before the 
rotation. For example, if PTR_BC_TEXT_BELOW is specified and the barcode is rotated left, 
then the text will appear on the paper to the right of the barcode.

Direction of rotation. See values below.

Rotation is not possible.

Station

The printer station to be used. Only PTR_S_RECEIPT can be 
used.

FileName

Name of Windows bitmap file. The file must be in 
uncompressed and 2 color (black and white) format. Color 
inversion may be necessary. 

Width

Printed width of the bitmap to be performed. Only 
PTR_BM_ASIS can be used.

Alignment

Placement of the bitmap. (No alignment other then left-most 
print column possible (PTR_BM_LEFT).)

PTR_BM_ASIS is the only valid Width value for the Kiosk printer.

PTR_RP_RIGHT90

Rotate printing 90º to the right (clockwise). (Not valid.)

PTR_RP_LEFT90

Rotate printing 90º to the left (counter-clockwise).
The printer prints in Landscape mode and can’t print bitmaps 
within OPOS commands. The printer will not print any text 
until it is switched back into Normal, the page is full, or 
receives a FF to print and eject the page. You need to set the 
RecLineChars to define the page width.

PTR_RP_ROTATE180

Rotate printing 180º, that is, print upside-down. (Not valid.)

PTR_RP_NORMAL

End rotated printing.

The driver will send an FF to start the print out and eject the page after printing.