Fujifilm F11 Manual Do Utilizador

119

118

The camera does not
emit any sound.

Frame erase does not
erase the frame.

The ERASE ALL
function does not erase
all the frames.

Screens are not
displayed in English.

There is no image or
sound on the TV.

The TV image is black
and white.

When connecting the
camera to a PC, the
photographed image or
playback image
appears on the
camera’s LCD monitor.

Nothing happens when
using the Mode switch.

The camera no longer
works correctly.

Cannot print with
PictBridge.

The camera was
connected to a PC
when the USB mode
was set to “

®

”.

i The camera volume is set too low.
i The microphone was blocked during

shooting/recording.

i There is something covering the speaker

during playback.

Some frames may be protected.

A language other than English is selected
in the “

ô

” setting in the “

˜

”

SET-UP menu (

➡P.88).

i The included A/V cable was connected

during movie playback.

i The camera is not connected to the TV

correctly.

i “TV” is selected as the TV input.
i The “

õ

” video output setting is

incorrect.

i The TV volume is turned down.

The “

õ

” video output setting is incorrect.

i The USB cable (mini-B) is not correctly

connected to the PC or camera.

i The PC is not turned on.

i Camera malfunction.

i The battery has run out.

The camera has suffered an unforeseen
problem.

“

®

” PICTBRIDGE is not selected in “

ò

”

USB mode in the “

˜

” SET-UP menu.

i Adjust the volume.
i Take care not to block the microphone

during shooting/recording.

i Make sure that the speaker is

uncovered.

Unprotect frames using the camera on
which the protection was first applied.

1Press the “MENU/OK” button to display

the menu.

2Press “

a

” or “

b

” to select “

˜

” SET-UP

and press “

c

”.

3Press “

a

” or “

b

” to select “

ô

”

4Press “

c

”.

5Press “

a

” or “

b

” to select “ENGLISH”.

6Press the “MENU/OK” button.

i After the movie playback mode is stopped,

connect the camera and TV correctly.

i Connect the camera and TV correctly.

i Set the TV input to “VIDEO”.
i Change the setting to “NTSC” or “PAL”

(

➡P.88).

i Adjust the volume.

Change the setting to “NTSC” or “PAL”
(

➡P.88).

i Set up the camera, and connect the USB

cable (mini-B) correctly.

i Turn the PC on.

i Briefly remove the battery or disconnect

the AC power adapter. Then reload the
battery or reconnect the AC power
adapter and try again.

i Load a fully charged battery.

Briefly remove the battery or disconnect
the AC power adapter. Then reload the
battery or reconnect the AC power adapter
and try again. If you think the camera is
faulty, contact your FUJIFILM dealer.

Select “

®

” PICTBRIDGE in “

ò

” USB

mode in the “

˜

” SET-UP menu.

Perform steps 1 to  3 to remove the
camera from the PC.
h Windows
1 The “New Hardware Found” wizard or

“Scanner and Camera” wizard appears.
If the wizard does not appear, proceed
to step 3.

2 Click the [Cancel] button.
3 Disconnect the camera from the PC.
h Macintosh
1 The window for locating the driver

appears. If the window does not
appear, proceed to step 3.

2 Click the [Cancel] button.
3 Disconnect the camera from the

Macintosh.

The self-timer lamp
does not light when
charging the battery.

The self-timer lamp
blinks during charging
and the battery won’t
charge.

No power.

Power cuts out during
operation.

Battery runs out
quickly.

No photograph is taken
when pressing the
shutter button.

Cannot use the flash.

The flash settings are
restricted and cannot
be selected.

The playback image is
dark even though the
flash was used.

The image is blurred.

There is speckling on
the image.

eIf you think the camera is faulty, check the following once more.

i There is no battery in the camera.
i The battery is loaded backward.
i The camera and AC power adapter are

not connected correctly.

i The battery terminals are dirty.

i The battery can no longer be recharged.

i The battery has run out.
i The AC power adapter plug has come

out of the power outlet.

i The battery is loaded backward.
i The battery cover is not closed correctly.
i The camera has been left for a long

period with battery and AC power
adapter removed.

The battery has run out.

i Camera is used in extremely cold

conditions.

i The terminals are soiled.

i The battery can no longer be recharged.

i No xD-Picture Card is inserted.
i The xD-Picture Card is full.

i The xD-Picture Card is not formatted.

i The  xD-Picture Card contact area is

soiled.

i The xD-Picture Card is damaged.
i The Auto power off function has turned

the camera off.

i The battery has run out.

i The shutter button was pressed while

the flash was charging.

i Photography mode is set to “

À

” or “

,

”.

i Continuous shooting is selected.

The Photography mode is set to “

B

”,

“

À

”, “

,

”, “

.

”, “

©

”, “

M

” or “

<

”.

i The subject is too far away.

i Your finger was covering the flash.

i The lens is dirty.
i You photographed scenery with Macro

mode selected.

i You took a close-up shot without

selecting Macro mode.

i You are shooting a subject that is not

suited to autofocusing.

The picture was taken with a slow shutter
speed (long exposure) in a high-
temperature environment.

i Load the battery.
i Load the battery in the correct direction.
i Connect the camera and AC power

adapter correctly.

i Take the battery out briefly and then

reload it.

i Wipe the battery terminals with a clean,

dry cloth.

i Load a new battery. If the battery still

fails to charge, contact your FUJIFILM
dealer.

i Load a fully charged battery.
i Plug the adapter back in.

i Load the battery in the correct direction.
i Close the battery cover correctly.
i Load the battery or connect the AC

power adapter, and wait a short time
before turning the camera on.

Load a fully charged battery.

i Put the battery in your pocket or another

warm place to heat it and then load it
into the camera just before you take a
picture.

i Wipe the battery terminals with a clean,

dry cloth.

i Load a new battery.

i Insert an xD-Picture Card.
i Insert a new xD-Picture Card or erase

some unnecessary frames.

i Format the xD-Picture Card on the

camera.

i Wipe the xD-Picture Card contact area

with a clean dry cloth.

i Insert a new xD-Picture Card.
i Turn the camera on.

i Load a fully charged battery.

i Wait until the charging is completed

before pressing the shutter button.

i Change the Photography mode.
i Set continuous shooting to “OFF”.

The flash settings are restricted because
the camera settings are tailored to the
scene being shot. Change the
Photography mode for a wider range of
flash settings.

i Move to within the effective flash range

before taking the picture.

i Hold the camera correctly.

i Clean the lens.
i Cancel Macro mode.

i Select Macro mode.

i Use AF/AE lock to take the picture.

This is a characteristic of CCDs and does
not indicate a camera fault.