Fujifilm F700 Manual Do Utilizador
57
Advanced
Features
56
Use this feature to photograph the same image
with different exposure settings. Auto bracketing
automatically shoots 3 consecutive frames, one of
which is correctly exposed while the remaining two
are underexposed and overexposed respectively
by a set amount.
with different exposure settings. Auto bracketing
automatically shoots 3 consecutive frames, one of
which is correctly exposed while the remaining two
are underexposed and overexposed respectively
by a set amount.
h The three available settings are ±1/3 EV, ±2/3 EV
and ±1 EV. See P.101 for more information on EVs.
●
!
If the underexposed or overexposed frame is outside the
camera’s control range, the shot is not taken with the
specified setting increments.
camera’s control range, the shot is not taken with the
specified setting increments.
●
!
Flash photography cannot be used.
●
!
This feature always takes 3 shots. However, if there is
insufficient space on the xD-Picture Card for 3 shots, no
picture will be taken.
insufficient space on the xD-Picture Card for 3 shots, no
picture will be taken.
j AUTO BRACKETING
1
After setting the exposure for bracketing, hold down
the “
the “
f
” button 1 and press “g” 2 to select “
j
”.
2
Ｐ
Ｐ
５００ Ｆ５．６
５００ Ｆ５．６
４９
４９
０ＦＦ
０ＦＦ
0
1
0
2
ＢＲＡＣＫＥＴＩＮＧ
ＢＲＡＣＫＥＴＩＮＧ
±１／３ ＥＶ
±１／３ ＥＶ
±１ ＥＶ
±１ ＥＶ
±２／３ ＥＶ
±２／３ ＥＶ
±２／３ ＥＶ
Use this setting to soften or emphasize outlines or
to adjust the image quality.
to adjust the image quality.
HARD
: Emphasizes the outlines.
Best for shots of subjects such as buildings
or text where you want sharp images.
or text where you want sharp images.
SOFT
: Softens the outlines.
Best for shots of subjects such as people,
where a softer image is desirable.
where a softer image is desirable.
NORMAL : Best for ordinary photography.
Provides edge sharpness that is ideal
for ordinary shots.
for ordinary shots.
G SHARPNESS
Brightness adjustment allows you to change just
the amount of light emitted by the flash to suit the
photography conditions or to achieve a desired
effect.
the amount of light emitted by the flash to suit the
photography conditions or to achieve a desired
effect.
h Adjustment range: ±2 steps
–0.6 EV to +0.6 EV in approx. 0.3 EV increments
(total: 5 levels selectable)
See P.101 for information on EVs.
(total: 5 levels selectable)
See P.101 for information on EVs.
●
!
Depending on the type of subject and the shooting distance,
brightness adjustment may have no effect.
brightness adjustment may have no effect.
●
!
The image may appear dark when the shutter speed is set to
speeds higher than 1/1000 sec.
speeds higher than 1/1000 sec.
z FLASH BRIGHTNESS ADJUSTMENT
ＳＨＡＲＰＮＥＳＳ
ＳＨＡＲＰＮＥＳＳ
ＳＯＦＴ
ＳＯＦＴ
ＮＯＲＭＡＬ
ＮＯＲＭＡＬ
ＨＡＲＤ
ＨＡＲＤ
ＦＬＡＳＨ
ＦＬＡＳＨ
−０．３
−０．３
−０．６
−０．６
−０．６
０
＋０．３
＋０．３
PHOTOGRAPHY MENU
PHOTOGRAPHY MENU
In shots composed in this way, the camera may be
unable to focus on the subject (the 2 women in this
case).
Set the focus mode to “AF (CENTER)” and take the
shot using AF/AE lock.
unable to focus on the subject (the 2 women in this
case).
Set the focus mode to “AF (CENTER)” and take the
shot using AF/AE lock.
h Selecting the focus mode
B
: See P.23.
N
,
M
,
<
,
>
: See P.54.
USING AF/AE LOCK
1
４９
４９
５００ Ｆ５．６
５００ Ｆ５．６
Ｐ
Move the camera slightly so that one of the
subjects is in the AF frame.
subjects is in the AF frame.
2
When you press the shutter button down halfway,
the camera emits a short double-beep and focuses
on your subject. At that point, the AF frame on the
LCD monitor becomes smaller and the camera sets
the shutter speed and aperture (the viewfinder
lamp (green) changes from blinking to lit.).
the camera emits a short double-beep and focuses
on your subject. At that point, the AF frame on the
LCD monitor becomes smaller and the camera sets
the shutter speed and aperture (the viewfinder
lamp (green) changes from blinking to lit.).
3
４９
４９
５００ Ｆ５．６
５００ Ｆ５．６
Ｐ
Bebeep
５００ Ｆ５．６
５００ Ｆ５．６
Continue to hold the shutter button down halfway
(AF/AE lock). Move the camera back to the original
image and then fully press down on the shutter
button.
(AF/AE lock). Move the camera back to the original
image and then fully press down on the shutter
button.
●
!
You can reapply the AF/AE lock as many times as you like
before releasing the shutter.
before releasing the shutter.
●
!
The AF/AE lock operates in all photography modes and can
be used to ensure excellent results.
be used to ensure excellent results.
4
Click
５００ Ｆ５．６
５００ Ｆ５．６
◆
AF/AE Lock
◆
On the FinePix F700, when you press the shutter button down half way, the focus and exposure
settings are fixed (AF/AE lock). If you want to focus on a subject that is off to one side of the image or if
you want to set the exposure before you compose the final shot, lock the AF and AE settings and then
compose and shoot your picture to get the best results.
settings are fixed (AF/AE lock). If you want to focus on a subject that is off to one side of the image or if
you want to set the exposure before you compose the final shot, lock the AF and AE settings and then
compose and shoot your picture to get the best results.