Fujifilm F700 Manual Do Utilizador
73
Settings
72
FRAME NO.
CCD-RAW
Setting this function to “CONT.” makes file
management easier as it ensures that file names
are not duplicated when images are downloaded to
a PC.
management easier as it ensures that file names
are not duplicated when images are downloaded to
a PC.
CONT. : Pictures are stored beginning from the
highest file number stored on the last xD-
Picture Card used.
Picture Card used.
RENEW: Pictures are stored on each xD-Picture
Card beginning with a file number “0001”.
●
!
If the xD-Picture Card already contains image files with file
numbers higher than the highest file number on the last xD-
Picture Card, images are stored beginning from the highest
file number on the current xD-Picture Card.
numbers higher than the highest file number on the last xD-
Picture Card, images are stored beginning from the highest
file number on the current xD-Picture Card.
A
A
B
B
CONT.
RENEW
Formatted xD-Picture Card used for both A and B.
You can check the file number by viewing the
image. The last 4 digits of the 7-digit number in the
top right corner of the screen are the file numbers,
while the first 3 digits show the directory number.
image. The last 4 digits of the 7-digit number in the
top right corner of the screen are the file numbers,
while the first 3 digits show the directory number.
●
!
When you change the xD-Picture Card, always switch the
camera off before you open the battery cover. If you open the
battery cover without switching the camera off, the Frame
number Memory will not function.
camera off before you open the battery cover. If you open the
battery cover without switching the camera off, the Frame
number Memory will not function.
●
!
File NO. run from 0001 to 9999. Once 9999 is exceeded, the
directory number changes from 100 to 101. The maximum
number is 999–9999.
directory number changes from 100 to 101. The maximum
number is 999–9999.
●
!
The displayed frame number may differ for images
photographed on other cameras.
photographed on other cameras.
●
!
If the “
®
” message appears, see P.95.
Setting CCD-RAW to ON disables the signal processing functions (reconstituting the data received
from the CCD as an image) performed on the camera. Consequently, this task must be performed
on the computer.
from the CCD as an image) performed on the camera. Consequently, this task must be performed
on the computer.
✽ To rebuild images, FinePixViewer (on the bundled CD-ROM) must be installed on your computer.
■ The functions listed below cannot be used in CCD-RAW mode.
During shooting
Digital zoom, continuous shooting, and FinePix Photo mode (image quality, ISO and FinePix
Color) are unavailable.
Color) are unavailable.
During playback
Playback image quality is fixed at
1
(1280
× 960).
Playback can be zoomed up to 400%, but cropped images cannot be saved.
１００−９９９９
１００−９９９９
コマ
コマNo.
No.
Directory number
File number
Frame number
FORMAT
Formatting erases protected files also.
Formatting erases all the files.
Initialize the xD-Picture Card for use in the
camera.
You should copy important files that you do not
want to be erased to your computer or another
xD-Picture Card.
Formatting erases all the files.
Initialize the xD-Picture Card for use in the
camera.
You should copy important files that you do not
want to be erased to your computer or another
xD-Picture Card.
1 Use “d” or “c” to select "YES".
2 Pressing the “MENU/OK” button erases all the
2 Pressing the “MENU/OK” button erases all the
files and initializes the xD-Picture Card.
●
!
If the “å” “˚” “ƒ” or
“
“
©
” message appears, refer to P.95
before formatting the media and take the appropriate
measures.
measures.
ＦＯＲＭＡＴ
ＦＯＲＭＡＴ
ＳＥＴ
ＳＥＴ
ＮＯ
ＮＯ
ＹＥＳ
ＹＥＳ
ＦＯＲＭＡＴ ＯＫ？
ＦＯＲＭＡＴ ＯＫ？
ＥＲＡＳＥ ＡＬＬ ＤＡＴＡ
ＥＲＡＳＥ ＡＬＬ ＤＡＴＡ
ＯＫ
ＯＫ
SET–UP
ＳＥＴ−ＵＰ
ＳＥＴ−ＵＰ
ＰＯＷＥＲ ＳＡＶＥ
ＰＯＷＥＲ ＳＡＶＥ
2 ＭＩＮ
ＭＩＮ
ＩＭＡＧＥ ＤＩＳＰ．
ＩＭＡＧＥ ＤＩＳＰ．
ＯＦＦ
ＯＦＦ
ＳＥＴ
ＳＥＴ
ＣＡＮＣＥＬ
ＣＡＮＣＥＬ
ＯＫ
ＯＫ
BACK
BACK
ＦＯＲＭＡＴ
ＦＯＲＭＡＴ
ＯＫ
ＯＫ
ＢＥＥＰ
ＢＥＥＰ
ＳＨＵＴＴＥＲ
ＳＨＵＴＴＥＲ
ＳＨＵＴＴＥＲ
１/３
When this function is enabled, the screen
temporarily switches off (The viewfinder lamp
(green) flashes at 1-second intervals.) to save power
if the camera is not used for approx. 30 seconds. If
the camera remains unused for an additional interval
(2 minutes or 5 minutes), it is automatically switched
off. Use this function when you want to get the
maximum possible running time from your battery.
temporarily switches off (The viewfinder lamp
(green) flashes at 1-second intervals.) to save power
if the camera is not used for approx. 30 seconds. If
the camera remains unused for an additional interval
(2 minutes or 5 minutes), it is automatically switched
off. Use this function when you want to get the
maximum possible running time from your battery.
●
!
The Power Save function is disabled during Auto Play and
when a USB connection is being used.
when a USB connection is being used.
When the camera is in sleep mode, pressing the
shutter button down halfway wakes the camera up
so that it is ready to take pictures. This is useful
since the camera can be ready to take pictures
almost instantly.
shutter button down halfway wakes the camera up
so that it is ready to take pictures. This is useful
since the camera can be ready to take pictures
almost instantly.
●
!
You can wake the camera up by pressing any other button as
well as the shutter button.
well as the shutter button.
POWER SAVE SETTING
The Sleep function does not operate in SET–UP or Playback mode, but the camera will
automatically switch off if it is left unused for a set some time (2 or 5 minutes).
automatically switch off if it is left unused for a set some time (2 or 5 minutes).
◆
To restore power to the camera
◆
When the Auto Power Off function has switched the
camera off (2 or 5 minutes), you can restore camera
operation by switching the camera off and back on
again.
camera off (2 or 5 minutes), you can restore camera
operation by switching the camera off and back on
again.