Fujifilm S5200 Manual Do Utilizador

122

123

eThe table below lists the warnings that are displayed on the screen.

(Lit red)

(Blinking red)

The camera batteries are low or
completely out of charge.

Load new or fully charged batteries.

There is a strong likelihood of camera
shake because the shutter speed is slow.

Use flash photography. However, use a tripod for
some scenes and modes.

|

The AF (autofocus) cannot work effectively.

i If the image is too dark, take the picture at a

distance of around 2 m (6.6 ft.) from the subject.

i Use AF lock to take the picture.

Outside the AE continuous range.

The picture can be taken, but the correct
brightness (exposure) will not be obtained.

Camera malfunction or fault.

(Lit red)

i Turn the camera on again, taking care not to

touch the lens.

i Turn the camera off and on again. If the

message still appears, contact your FUJIFILM
dealer.

No xD-Picture Card is inserted.

Insert an xD-Picture Card.

i The xD-Picture Card is not formatted.
i The  xD-Picture Card contact area is

soiled.

i Camera fault.

i Format the xD-Picture Card on the camera.
i Wipe the contact area on the xD-Picture Card

with a soft dry cloth. It may be necessary to
format the xD-Picture Card. If the message still
appears, replace the xD-Picture Card.

i Contact your FUJIFILM dealer.

i The  xD-Picture Card contact area is

soiled.

i The xD-Picture Card format is incorrect.
i Camera fault.
i The xD-Picture Card is damaged.

i Wipe the contact area on the xD-Picture Card

with a soft dry cloth. It may be necessary to
format the xD-Picture Card. If the message still
appears, replace the xD-Picture Card.

i Contact your FUJIFILM dealer.

The xD-Picture Card is full.

Erase some images or use an xD-Picture Card
that has ample free space.

The timing for recording was incorrect
because the xD-Picture Card was
formatted on a PC.

Use an xD-Picture Card that was formatted on
the camera.

i The data could not be recorded due to

an  xD-Picture Card

error or a

connection error between the xD-
Picture Card and camera.

i The image cannot be recorded as it is

too large to fit in the available space on
the xD-Picture Card.

i Re-insert the xD-Picture Card or turn the

camera off and then on again. If the message
still appears, contact your FUJIFILM dealer.

i Use a new xD-Picture Card.

The frame number has reached 999-9999.

1 Insert a formatted xD-Picture Card into the

camera.

2 Set “RENEW” as the FRAME NO. setting in

the “

˜

” SET-UP menu.

3 Start taking pictures (The frame number starts

from “100-0001”).

4 Set “CONT.” as the FRAME NO. setting in the

“

˜

” SET-UP menu.

i The played back file was not recorded

correctly.

i The  xD-Picture Card contact area is

soiled.

i Camera fault.
i An attempt was made to play a movie or

display an image that was not recorded
on this camera.

i Images cannot be played back.

i Wipe the contact area on the xD-Picture Card

with a soft dry cloth. It may be necessary to
format the xD-Picture Card. If the message still
appears, replace the xD-Picture Card.

i Contact your FUJIFILM dealer.
i Movies and images cannot be played back.

■ Image Memory Card

h T h i s   I m a g e   M e m o r y   C a r d   i s   a   n e w   i m a g e

recording media (xD-Picture Card) developed
for digital cameras. The Image Memory Card
consists of a semiconductor memory (NAND-
type flash memory) to record digital image data.
The recording process is electrically performed
and enables erasure of existing image data as
well as re-recording of new image data.

h When using a new Memory Card, or a Memory

Card that has been formatted by a PC, be sure
t o   f o r m a t   t h e   c a r d   w i t h   y o u r   d i g i t a l   c a m e r a
before using it.

■ Protecting Your Data

h Images and movies may be lost or destroyed in the

following situations. Please note that FUJIFILM
assumes no responsibility for data that is lost or
destroyed.
1. Removal of the memory card or turning the power

off while the memory card is being accessed (i.e.,
during record, erase, initialization, and playback
operations).

2. Improper handling and use of the memory card by

the user or third party. 

h Save your important data to another media (i.e., MO

disk, CD-R, hard disk, etc.).

■ Handling xD-Picture Card

h When storing xD-Picture Cards, make sure that

they are kept out of the reach of children. An xD-
Picture Card could be swallowed cause suffocation.
If a child swallows an xD-Picture Card, seek
medical attention or call emergency number right
away.

h When inserting the xD-Picture Card into the

camera, hold the xD-Picture Card straight as you
push it in.

h Do not expose an xD-Picture Card to shock. Do not

apply pressure, and avoid bending.

h Do not use or store xD-Picture Card in hot and

humid places.

h Clean the xD-Picture Card with a soft dry piece of

cloth when dirty.

h When carrying or storing an xD-Picture Card, keep

it in the special protective case.

h The xD-Picture Card will work well for long time, but

will sooner or later lose its ability to store and play
back images or movies. If this happens replace it
with a new xD-Picture Card.

h Never remove the xD-Picture Card or turn the

camera off during data recording or erasing (xD-
Picture Card formatting) as this could be damaged
to the xD-Picture Card.

h The use of xD-Picture Cards is recommended with

FinePix S5200 / FinePix S5600.
The recording quality cannot be guaranteed when
xD-Picture Cards other than those manufactured by
FUJIFILM are used.

h The  xD-Picture Card may feel warm when it is

removed from the camera after taking pictures. This
is normal.

h Do not put labels on the xD-Picture Card. Peeling

labels can cause the camera not to work properly.

■ Using xD-Picture Card with a PC

h When taking pictures using an xD-Picture Card that

has been used on a PC, reformat the xD-Picture
Card using your camera for best quality.

h When formatting an xD-Picture Card, a directory

(folder) is created. Image data is then recorded in
this directory.

h Do not change or delete the directory (folder) or file

names on the xD-Picture Card because this will
make it impossible to use the xD-Picture Card in
your camera.

h Always use the camera to erase image data on an

xD-Picture Card.

h To edit image data, copy the image data to the PC

and edit the copy.

■ Specifications

Type

Image memory card for digital
cameras (xD-Picture Card)

Memory type

NAND-type flash memory

Conditions for use

Temperature: 
0°C to +40°C
(+32°F to +104°F)
Humidity: 
80% max. (no condensation)

Dimensions

25 mm 

× 20 mm × 2.2 mm

(0.98 in. 

× 0.79 in. × 0.09 in.) 

(W 

× H × D)