Fujifilm S3 Pro Guia De Utilização

30

31

xRelease mode 

Hold down this button 
to move the release 
mode switch.

xExposure mode dial

Allows you to select the exposure 
mode, the custom settings and 
the ISO setting,

    : Programmed Auto
    : Shutter-priority Auto
  : Aperture-priority Auto
  : Manual
    : Custom settings
    : ISO setting (sensitivity)

xRelease mode switch

Selects Single-frame, Continuous, Self-timer or Multi 
Exposure as the shutter release mode.

xLens release button

Hold down this button as 
you remove the lens.

xPower switch

Turns the camera on 
and off.

xFocus mode selector switch

Selects AF-S (Single-AF servo), AF-C 
(Continuous-AF servo) or M (Manual) 
as the focus mode.

xRemote release socket

Used to connect a 10-pin 
remote release.

xFlash pop-up button

To use the built-in flash, press 
this button to pop-up the flash.

xSynchronizing terminal

Use this to connect flash units 
that require a synchro cord.

xTop display panel

Displays the information
shown in the viewfinder 
along with other information.

xMain command dial

Changes settings such as the 
shutter speed.

xAccessory shoe

Mount an external flash here.

xDepth of field check 

This button allows you to 
check the depth of field.

xShutter button

Press this button down halfway to 
restore the camera to 
Photography mode. Press down 
fully to take a picture.

xSub-command dial

Changes the aperture and other 
settings.

xDiopter adjustment knob

Makes the image in the viewfinder easier to see. 
Set this knob to the position where the focusing 
area appears sharpest.

xFlash exposure 

Used with the Main-command dial 
to select the flash exposure 
compensation value.

xAuto exposure bracketing button

Used with the camera dials to select Auto Exposure Bracketing.
Main-command dial: Turns Auto Exposure Bracketing ON and OFF.
Sub-command dial: Selects a combination of exposure offset and number of shots.

xSynchro mode button

Used with the Main-command 
dial to select Synchro mode.

xMetering system selector dial

Selects Multi, Center-weighted or Spot 
as the metering system.

xAE-L / AF-L button

Locks the exposure and focus while 
pressed.

xLCD illuminator button

Illuminates the display panel.

xExposure compensation 

Used with the Main-command 
dial to select the exposure 
compensation value.