Fujifilm S3 Pro Guia De Utilização

52

53

This is a photography technique that allows you overlay photographed images on top of each other.
You can use this technique to compose shots that cannot be obtained normally.

Hold down the release mode switch unlock button
and set the release mode switch to “

p

” (multiple

exposure). When you select multiple exposure
mode, the “

p

” icon appears in the viewfinder

display.

According to the photography conditions, hold
down the “

b

” (exposure compensation) button 1

as you turn the Main-command dial 2 to set the
exposure offset.

◆

◆

In multiple exposure, a number of images are shot in the same frame. When you are overlaying
backgrounds and subjects, you must set the appropriate exposure offset before taking any shots.

h Test shooting is recommended since the

compensation actually required varies depending
on the shooting situation.

h When the background is completely dark and

subjects do not overlap, no compensation is
necessary for each shot.

■ General guide to exposure offsets

2

3

4

0

1

0

2

0

1

1 When you compose, focus and take the shot, a

preview image appears on the LCD monitor.

2 Press the “F2” button to move on to the next

shot.

h A preview image is always displayed, regardless

of the “PREVIEW” setting selected in SET-UP.

h If you change the release mode before multiple

exposure shooting is completed, no images are
recorded.

0

2

When you take the next (multiple exposure) shot, a
preview appears showing the overlaid images.

h To record the image: 

Press the “F1” or “MENU/OK” button.

h To take another multiple exposure shot: 

Press the “F2” button.

h To take the shot again without using multiple

exposure mode:
Press the shutter button again.

h To cancel multiple exposure mode without

recording the shots:
Press the “F3” or “BACK” button.

h To check the brightness distribution: 

Press the “F4” button.

CSM 11: In multiple exposure mode, one shot is taken in the frame each time the shutter button is

pressed, but continuous shooting can also be used (

➡P.111). Images in continuous

shooting are overlapped in the preview display. Use the “F1”, “F3” and “F4” buttons. “

K

”

cannot be selected in continuous shooting.

●

Multiple exposures cannot be used when only 1 frame is shot in continuous shooting.

●

You cannot use the built-in flash for continuous shutter release.

●

See P.50 for the max. no. of consecutive shots in multiple exposure shooting.

The settings for multiple exposure shooting can
only be changed from the function menu. At this
point, the last settings specified apply.

p MULTIPLE EXPOSURE