Fujifilm S3 Pro Guia De Utilização

80

81

Use the procedure below to set the density of the color used when images are shot.

h Factory default setting: 

STD

h If you want to view or print the image data directly, do not select “ORG”.

h If you want to change this setting, select “WIDE” as the “D-RANGE” (Dynamic range) setting in SET-UP.

Press the “FUNC” 
button to switch 
between functions.

Color

Tone

Sharpness

Dynamic range

h If you want to view or print the image data directly, do not select “ORG”.

Use the procedure below to set the contrast when images are shot.

h Factory default setting: 

STD

h If you want to view or print the image data directly, do not select “OFF”.

Use this setting to soften or sharpen the outlines in an image and to adjust the quality of the
photographed image.

h Factory default setting: 

STD

Sets the dynamic range used for photographed images.

h Factory default setting: 

AUTO

AUTO

The camera automatically varies the dynamic range between 100% and 400% according
to the scene being shot before taking the picture. This mode suppresses white flaring and
black patches in scenes with high contrast while also enabling you to achieve good levels
of contrast in pictures taken indoors or in cloudy weather where a wide dynamic range is
not needed.

WIDE 1

Takes the picture with the dynamic range set to 230% regardless of the scene being shot.

WIDE 2

Takes the picture with the dynamic range set to 400% regardless of the scene being shot.

STD

(STANDARD)

This setting sets the contrast for photographed images to the standard level.

HARD

This setting provides a higher level of contrast than the “STD” setting.

ORG

(ORIGINAL)

This setting specifies a lower contrast than the “STD” setting. 
Use this setting for images that will undergo image processing for use in commercial
printing.

STD

(STANDARD)

This setting applies the optimum level of sharpness for normal shots.

HARD

This setting sharpens the outlines in an image and is best for images of subjects such as
buildings or text where clarity is important.

OFF

Sharpness processing is not applied in this setting. Use this setting for images that will
undergo image processing for use in commercial printing.

STD

(STANDARD)

This setting sets the standard color density.

HIGH

This setting provides a higher color density than the “STD” setting.

ORG

(ORIGINAL)

This setting specifies a lower color density than the “STD” setting. Use this setting for
images that will undergo image processing for use in commercial printing. 

B/W

This setting converts the colors in the photographed image to black and white.

◆

◆

Selecting “F1” or “F2” as the film simulation setting (

➡P.79) prevents

these settings from being changed. Select “STD” as the film
simulation setting.