Fujifilm S3 Pro Guia De Utilização

114

115

The “Connecting to a computer” section explains how to connect the camera to your computer
using the USB cable (IEEE 1394 cable) and describes the functions you can use once the camera
and computer are connected.

If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the
AC power adapter when connecting the camera to a computer.

Refer to Software Quick Start Guide the first time you connect the
camera to your computer.
Install the software first. Do not connect the camera with
the computer before installing all the software.

CD-ROM

(Software for FinePix)

h If your PC supports USB 2.0 (High-speed USB), data can be transferred faster than with previous

USB versions.

●

This camera does not support IEEE 1394b (FireWire 800). Use IEEE 1394 (FireWire 400).

This mode provides a simple way to read images from a media and store images onto a media. The
USB or IEEE 1394 (FireWire) interface connection can be used for high-speed file transfer (

➡P.115).

To connect via an IEEE 1394 port, check that the interface is OHCI compliant and then refer to the
table below to check whether it is supported by your operating system.

!~@ DSC (Mass storage device) mode

For information on taking pictures using IEEE 1394, refer to the Hyper Utility Software HS-V2
Ver.3.0 (or later) Quick Start Guide.

ＳＥＴ−ＵＰ

ＳＥＴ−ＵＰ

2

1

3

4

5

ＤＡＴＥ／ＴＩＭＥ       ：ＳＥＴ

ＤＡＴＥ／ＴＩＭＥ       ：ＳＥＴ

ＵＳＢ ＭＯＤＥ        

ＵＳＢ ＭＯＤＥ        

１３９４ ＭＯＤＥ       ：

１３９４ ＭＯＤＥ       ：

ＢＥＥＰ         ：ＬＯＷ

ＢＥＥＰ         ：ＬＯＷ

ＳＥＴ

ＳＥＴ

ＣＡＮＣＥＬ

ＣＡＮＣＥＬ

1 Insert a media with images into the camera.
2 Turn the camera on and press the “MENU/OK”

button.

3 Select “

! ~ @

” in “USB MODE” or “1394

MODE” in the SET-UP menu (

➡P.101) and then

turn the camera off.

●

Use the AC Power Adapter AC-5VX (sold separately) for the
connection (

➡P.113). If shutting off power supply during

communication, the files on the media may be damaged.

●

If inserting an xD-Picture Card and a CF/Microdrive into the
camera at the same time, images will be recorded onto the
media selected as the “MEDIA” (

➡P.102).

1 Turn your PC on.
2 Connect the camera to the PC using the USB

cable (mini-B) or IEEE 1394 cable.

3 Turn the camera on.

●

Always use the cable provided with your camera. If you use
other cable, your camera may not work correctly.

●

Make sure that the USB cable (mini-B) or IEEE 1394 cable is
connected correctly and is pushed in.

●

Do not connect the USB cable (mini-B) and the IEEE 1394
cable at the same time.

h The access lamp blinks when the camera and

computer are exchanging data.

h “

w

” is displayed on rear display

panel.

h Power save and Auto power off are disabled

during DSC connection.

●

Before replacing the media, always disconnect the camera
from the PC using the procedure on P.116.

●

Do not disconnect the USB cable (mini-B) or IEEE 1394
cable while communication is in progress. If shutting off
power supply during communication, the files on the media
may be damaged.

0

1

0

3

0

2

■ Operating system compatibility chart (Windows)

✓: Can be connected   —: Cannot be connected

—

✓

✽2

✓

✓

✓

IEEE 1394

✓

✽1

✓

✓

✓

✓

USB

✽1 Can be used by installing the driver from the bundled CD-ROM.

✽2 Select Windows Update from the Start button menu and update the 1394 device driver (Your system must be

capable of connecting to the Internet).

■ Operating system compatibility chart (Macintosh)

✓: Can be connected

✽1 Contact Apple Computers (http://www.apple.com) for information on software updates.

✽2 Versions 10.2.6 to 10.3.5 as at November 2004. Refer to the FUJIFILM website for information on supported

operating systems. 
http://home.fujifilm.com/products/digital/ 

✽1

✓

✽2

IEEE 1394

✓

✓
✓

USB