Fujifilm FinePix F410 Manual Do Utilizador

Check that the camera is switched off. Plug the
AC power adapter connector into the DC IN 5V
socket on the camera and then plug the adapter
itself into the main power outlet.
The self timer lamp lights (blue) and battery
charging begins. When charging is completed,
the self-timer lamp switches off.
A fully discharged battery takes roughly 3 hours
to fully recharge (at an ambient temperature of
+21°C to +25°C (+70°F to +77°F)).

Use the AC power adapter to avoid losing power
at inconvenient times, such as when you are
downloading photographed images to your
computer. Using the AC power adapter also
allows you to take pictures and play back images
without worrying about depleting the battery.
hCompatible AC power adapters

AC-5VW/AC-5VS/AC-5VHS/AC-5VH

●

Use only the FUJIFILM products listed above.

●

See P.115 for notes on using the AC power adapter.

●

Only connect or disconnect the AC power adapter when
the camera is switched off.
Connecting or disconnecting the AC power adapter while
the camera is switched on temporarily interrupts the
power supply to the camera, so that images or movies
being shot at the time are not recorded. Failing to switch
the camera off first can also result in damage to the xD-
Picture Card or malfunctions during PC connection.

●

Charging times increase at low temperatures.

●

If the self-timer lamp blinks during charging, a charging
error has occurred and the battery cannot be charged. If
this occurs, see P.122.

●

Switching the camera on during charging interrupts the
charging.

●

You can charge the battery more quickly by using the
BC-65 Battery Charger (sold separately) (

➡P.110).

●

The shape of the plug and socket-outlet depends on the
country of use.

When you first switch the camera on, the date is
cleared. Press the “MENU/OK” button to set the
date and time.

Slide the POWER switch to turn the camera on and
off. When you switch the camera on, the viewfinder
lamp lights (green).

●

To set the date and time later, press the “BACK” button.

●

If you do not set the date and time, this confirmation
screen will appear each time you switch the camera on.

●

When you switch the camera on, the self timer lamp
lights for about 5 seconds.

●

If you load the battery while the camera’s POWER switch
is set to ON, the viewfinder lamp/self timer lamp lights
briefly. This is normal and does not indicate a fault.

If the “

q

/

T

” mode is selected, the lens cover opens

and the lens slides out. Avoid pressing on the lens
so as not to damage precision components.
Obstructing the lens will cause a malfunction or fault
and the “

ß

” or “

´

” message

will appear. Take care also not to get fingerprints on
the camera lens as this will result in impaired image
quality in your shots.

Continued on next page...