Fujifilm FinePix S9000 Manual Do Utilizador
116
117
Viewing
Images
6
6.3 CONNECTING TO A PC
The “Connecting to a PC” section explains how to connect the camera to your PC using the USB
cable (mini-B) and describes the functions you can use once the camera and PC are connected.
cable (mini-B) and describes the functions you can use once the camera and PC are connected.
If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the
AC power adapter when connecting the camera to a PC.
AC power adapter when connecting the camera to a PC.
Refer to Section 5 the first time you connect the camera to your PC.
Install the software first. Do not connect the camera to the PC before installing
all the software.
Install the software first. Do not connect the camera to the PC before installing
all the software.
This mode provides a simple way to read images from a media and store images onto a media.
CD-ROM
(Software for FinePix
CX
)
¶
DSC (Mass storage device) mode
6.3.1 Connecting to a PC
1
Insert the media into the camera.
Gold marking
Gold
contact
area
1 Set the Power switch to “
w
” to turn the camera
on.
2 Select “
¶
” DSC in “
ò
” USB MODE in the
“
˜
” SET-UP menu (
➡P.100).
3 Turn the camera off.
2
DSC
DSC
1
4
3
2
SET
SET
SET
SET
ENGLISH
ENGLISH
ENGLISH
OK
OK
SET
SET
SET
:
:
:
:
:
:
:
:
:
:
0
1
0
2
●
!
Use the AC Power Adapter AC-5VX (sold separately) for the
connection (
connection (
➡P.112). If shutting off power supply during
communication, the files on the media may be damaged.
●
!
If inserting an xD-Picture Card and a CF/Microdrive into the
camera at the same time, images will be recorded onto the
media selected as the “
camera at the same time, images will be recorded onto the
media selected as the “
¡
” MEDIA (
➡P.100).
Continued
●
!
Movies and images with CCD-RAW cannot be printed.
●
!
Images photographed with a camera other than FinePix
S9000 / FinePix S9500 may not be printed.
S9000 / FinePix S9500 may not be printed.
5
1 Press “d” or “c” to display the frame (file) for
which you want to specify PRINT settings.
2 Press “a” or “b” to set a value up to 99 as the
number of copies of the frame (file) to be printed.
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).
To specify more PRINT settings, repeat steps 1
and 2.
3 Always press the “MENU/OK” button after the
and 2.
3 Always press the “MENU/OK” button after the
settings are completed.
SHEETS
SHEETS
TOTAL
TOTAL
:00009
01
YES
YES
CANCEL
CANCEL
FRAME
FRAME
0
1
0
2
0
3
6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER —
PictBridge FUNCTION
6
“PRINT OK?” appears on the screen. Press the
“MENU/OK” button to begin printing.
“MENU/OK” button to begin printing.
Disconnecting the printer
1 Check that “PRINTING” is not displayed on the
camera’s screen.
2 Turn the camera off. Unplug the USB cable
(mini-B).
USB socket
(mini-B)
(mini-B)
7
Printer starts printing the specified number of
prints.
prints.
●
!
Press the “DISP/BACK” button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
PRINTING
PRINTING
CANCEL
CANCEL
1/9
SHEETS
SHEETS
CANCEL
CANCEL
PRINT OK?
PRINT OK?
TOTAL:
TOTAL:
9
SHEETS
SHEETS
YES
YES
CANCEL
CANCEL