Fujifilm FinePix Z2 Manual Do Utilizador

Página de 61
13
Getting
Ready
1
12
LOADING THE BATTERY AND THE MEDIA
4
3
Close the battery cover.
!
If the xD-Picture Card is oriented incorrectly, it will not go all
the way into the slot. Do not apply force when inserting an
xD-Picture Card.
Gold marking
Gold contact area
Align the gold marking on the xD-Picture Card slot
with the gold contact area on the xD-Picture Card
and push the card firmly all the way into the slot.
How to replace the xD-Picture Card
Push the xD-Picture Card into the slot and then
slowly remove your finger. The lock is released and
the xD-Picture Card is pushed out.
Checking the battery charge
1 There is ample battery charge.
2 The battery is almost half charged.
3 There is insufficient charge left in the battery.
The battery will soon run out. Have a new
battery ready.
4 The battery is depleted. The display will shortly
go blank and the camera will stop working.
Replace or recharge the battery.
Blinking red
Lit white
Lit white
1
2
4
Lit red
3
Turn the camera on and check the battery level indicator on the LCD monitor.
Á
”, “
Ä
” or “
Ã
” appears as a small icon
on the left-hand side of the LCD monitor.
!
Depending on the camera mode, the transition from “
Ã
” to
V
” may occur more quickly.
!
Due to the nature of the battery, the battery level indicator
(
Ä
Ã
or 
V
) may appear early when the camera is
used in cold locations. This is normal. Try warming the
battery in your pocket or a similar location before use.
V
” appears as a large icon in the center of the
LCD monitor.
Auto power off function 
When the Auto power off function is active, if the camera is left unused for 2 or 5 minutes, this function
turns the camera off (
➡P.81). 
To restore power to the camera to take pictures, briefly close the lens cover completely and then re-
open it. To play back images, close the lens cover and hold down the “
w
” button for about 1 second.