Fujifilm FinePix S1 Manual Do Utilizador
4
Hold down both the self-timer button “
!
” and the AE
lock button “AE-L” and switch the camera on.
5
Press the shutter button. The mirror swings up and the
shutter opens and remains open.
shutter opens and remains open.
6
Hold the camera so that the light shines on the CCD
and check the CCD surface.
and check the CCD surface.
• If there is soiling on the CCD surface, contact an authorized FUJIFILM
dealer to request cleaning or clean the CCD yourself as described on the
next page.
next page.
• If there is no soiling on the CCD surface, proceed to step 3 in “Cleaning
the CCD” on the next page to drop the mirror back down.
115
5
Determining Whether Cleaning is Required
1
Connect the AC power adapter (sold separately) and
load the battery adapter.
load the battery adapter.
• During cleaning, always use the AC power adapter and battery adapter to
ensure that a power failure does not cause the mirror to drop down or the
shutter to close and damage the camera.
shutter to close and damage the camera.
2
Remove the camera lens.
3
Set the exposure mode dial to M.