Fujifilm FinePix S1 Manual Do Utilizador

124

• Load new batteries.
• Plug the adapter back in.

• Fit new batteries.

• Put the batteries in your pocket

or another warm place to heat
them and then load them into
the camera just before you take
a picture.

• Wipe the battery terminals with

a clean, dry cloth.

• Fit new batteries.

• Fit new batteries.

• Fit new replacement batteries.

• Load a media.
• Load a new media or erase

some frames.

• Remove the write-protection.

• Format the media.
• Clean the SmartMedia contact

surface (the gold-colored area)
with a clean dry cloth.

• Load a new media.
• Switch the camera on.

• Fit new batteries.
• Set the focusing mode to

manual (M), focus on the
subject manually and take the
picture.

• Close the built-in flash and then

take the picture.

• Refer to the warning displays on

P.121, 122 and 123 and take
the appropriate action.

• The flash pops up.

• Wait until charging is completed

before pressing the shutter
button.

• Use lithium batteries.

No power.

Power cuts out during
operation.

Battery runs out
quickly.

The date and time
are reset when you
replace the AA-size
batteries.

No photograph is
taken when the
shutter button is
pressed.

I can’t use the flash
to take pictures.

• The batteries are flat.
• The AC power adapter plug has

come out of the power outlet.

• The batteries are flat.

• You are using the camera in

extremely cold conditions.

• The terminals are soiled.

• The batteries have reached the

end of their effective lives.

• No button cell CR2025 batteries

are fitted.

• The button cell CR2025

batteries are depleted.

• No media is loaded.
• The media is full and no further

data can be recorded.

• The SmartMedia is write-

protected.

• The media is not formatted.
• The SmartMedia contact

surface (the gold-colored area)
is soiled.

• The media is damaged.
• The Auto Power Off function

has switched the camera off.

• The batteries are flat.
• The camera will not focus.

• You tried to take a picture using

the built-in flash when you were
also using the battery adapter.

• An error occurred.

• The flash is set to Suppressed

Flash mode. (The flash is
closed.)

• You pressed the shutter button

while the flash was charging.

• You are using the battery

adapter.