Fujifilm FinePix S1 Manual Do Utilizador
35
1
Use the procedure below to erase recorded images.
To erase all the recorded images, see P.86.
To erase all the recorded images, see P.86.
1
Display the image to be erased. (See “To View Images
(Playback)”.)
(Playback)”.)
2
When you press function button [2], the image is
displayed on the rear display panel for erase
confirmation.
displayed on the rear display panel for erase
confirmation.
• If the image is protected (
☞
P.88), the error tone sounds and an error
message is displayed for about 3 seconds.
• If DPOF settings have been specified for the image, the error tone
sounds and an erase confirmation message is displayed. Check the
image and then proceed to step 3.
image and then proceed to step 3.
3
Press function key [4] to erase the selected image. The
next recorded image then appears.
next recorded image then appears.
Erasing Single Recorded Images
• To cancel the procedure, press function key [1].
• To continue erasing images, repeat steps 2 and 3.
• To continue erasing images, repeat steps 2 and 3.