Fujifilm FinePix S1 Manual Do Utilizador
This setting sets the contrast for photographed images to the
standard level.
standard level.
Use this setting for images that will undergo image processing
for use in commercial printing. This setting provides a higher
level of contrast than the “STD” setting.
for use in commercial printing. This setting provides a higher
level of contrast than the “STD” setting.
This setting specifies a lower contrast than the “STD” setting.
Use this setting for images that will undergo image processing
for use in commercial printing.
Use this setting for images that will undergo image processing
for use in commercial printing.
STD
(default)
HARD
ORG
Display
Name
Description
46
■
Use the procedure below to set the contrast when images are shot.
1
Press the “FUNC” button twice.
2
The
icon for the tone setting appears on the rear
display panel. Press function button [2].
With the tone set to “STD”
• The display changes in the cycle shown below each time function button
[2] is pressed.
• The same settings can also be selected by holding down function button
[2] and pressing “
a
” on the 4-direction button. You can select settings in
the reverse order by holding down function button [2] and pressing “
b
” on
the 4-direction button.
ORG
STD
HARD
Setting the Tone
• If you want to view or print the image data directly, do not select “ORG”.
Rear Display Panel