Fujifilm FinePix S1 Manual Do Utilizador
60
1
Set the exposure mode dial to “
z
”.
• When you select
z
(AUTO mode), the following function statuses apply:
Metering mode : Multi-pattern metering (
☞
P.69)
Flash
:
j
Normal synchro mode (
☞
P.74)
• The program shift, exposure compensation and slow synchro functions
cannot be selected.
2
Check that the focus indicator “
●
” is lit and take the
picture.
• If one of the following warnings appears on the top display panel or
viewfinder display, the subject is too bright or too dark and is beyond the
camera control range.
camera control range.
•
⁄
: Use an ND (light volume adjustment) filter.
•
¤
: Use the flash.
Shooting Using Exposure Modes
This exposure mode is the easiest to use for
taking pictures since the photographer can
leave the exposure settings to the camera.
This exposure mode is recommended for
people using an SLR camera for the first
time.
See P.80 for information on using this mode
with other functions.
taking pictures since the photographer can
leave the exposure settings to the camera.
This exposure mode is recommended for
people using an SLR camera for the first
time.
See P.80 for information on using this mode
with other functions.
z
: AUTO
Differences between AUTO and Programmed auto
Both modes use the same exposure control method, but the programmed auto
mode allows greater flexibility in the photography settings since program shift
(
mode allows greater flexibility in the photography settings since program shift
(
☞
P.61), exposure compensation (
☞
P.71) and slow synchro (
☞
P.75) can
also be set.
✎
Important