Fujifilm FinePix S1 Manual Do Utilizador
63
3
1
Set the exposure mode dial to “A” and set the aperture
setting (narrowest aperture to widest aperture) on the
command dial.
setting (narrowest aperture to widest aperture) on the
command dial.
2
Check that the focus indicator “
●
” is lit and take the
picture.
• If one of the following warnings appears on the top display panel or
viewfinder display, the subject is too bright or too dark and is beyond the
camera control range.
camera control range.
•
⁄
: Set a higher aperture setting. If the warning still appears with the
higher aperture setting, use an ND (light volume adjustment) filter.
•
¤
:
Set a lower aperture setting. If the warning still appears with the
lower aperture setting, use the flash.
lower aperture setting, use the flash.
In this mode, the photographer sets the
aperture (narrowest aperture to widest
aperture) and the camera automatically
controls the shutter speed. This mode is
best for photographs where the depth of
field is the main priority, such as shots
where you both near and distant objects in
clear focus or where you want the
background out of focus. You can also use
this mode to vary the flash control range by
changing the aperture when you are taking
pictures with the flash (
aperture (narrowest aperture to widest
aperture) and the camera automatically
controls the shutter speed. This mode is
best for photographs where the depth of
field is the main priority, such as shots
where you both near and distant objects in
clear focus or where you want the
background out of focus. You can also use
this mode to vary the flash control range by
changing the aperture when you are taking
pictures with the flash (
☞
P.74).
See P.80 for information on using this mode
with other functions.
with other functions.
A: Aperture-priority Auto