Fujifilm FinePix S3100 Manual Do Utilizador

!

@

#

＊

16

1 There is ample battery charge.
2 There is insufficient charge left in the batteries.

The batteries will soon run out. Have a new set
of batteries ready.

3 The batteries are depleted. The display will

shortly go blank and the camera will stop
working. Replace or recharge the batteries.

Turn the camera on and check the battery charge.

“

C

” appears as a small icon on the right-hand

side of the screen. “

V

” appears as a large icon

on the screen.

●

Depending on the camera mode and the type of batteries used, the transition from “

C

” to “

V

” may occur more

quickly.

●

Due to the nature of the battery, the battery low warning may appear early when the camera is used in cold
locations. This is normal. Try warming the batteries in your pocket or a similar location before use.

✽ Battery level warning
1) The camera’s estimation of the remaining battery charge varies greatly depending on the camera operation mode.

Consequently, even if “

C

” or “

V

” is not displayed in Playback mode, one of them may appear when you change

to Photography mode.

2) Depending on the battery type and the level of charge in the batteries, the camera may run out of power without first

displaying a battery level warning. This is particularly to happen when batteries that have run out of charge once are
re-used.
In situation 2), immediately load new or fully charged replacement batteries.

Lit red

   １６

   １６

Ｎ

Blinking red

   １６

   １６

Ｎ

◆

◆

When this function is active, it also turns off the screen (sleep mode) to reduce power consumption if
the camera is not used for 60 seconds (

➡P.61). If the camera is then left unused for 2 or 5 minutes, the

Power save function turns the camera off. To turn the camera back on, set the Power switch to “OFF”
briefly and then back to “

q

” or “

w

”.