Fujifilm FinePix S3100 Manual Do Utilizador

91

eIf you think the camera is faulty, check the following once more.

No power.

Power cuts out during
operation.

Batteries run out
quickly.

No photograph is taken
when the shutter button
is pressed.

Can’t set the camera to
Macro (close-up) mode.

Can’t use the flash.

The playback image is
dark even though the
flash was used.

The flash settings are
restricted and cannot be
selected.

The image is blurred.

There is speckling on
the image.

Can’t format the xD-
Picture Card.

i The batteries have run out.
i The batteries are loaded backwards.

i The battery cover is not closed correctly.
i The AC power adapter plug has come out

of the power outlet.

The batteries have run out.

i Camera is being used in extremely cold

conditions.

i The terminals are soiled.
i The batteries can no longer be recharged.

i The rechargeable batteries (if used) have

become deactivated, or the battery
capacity has diminished due to the
memory effect.

i No xD-Picture Card is inserted.
i The xD-Picture Card is full.

i The xD-Picture Card is not formatted.

i The  xD-Picture Card contact area is

soiled.

i The xD-Picture Card is damaged.
i The Auto power off function has turned the

camera off.

i The batteries have run out.

The camera is set to Scene position (

m

)

mode or to Movie mode (

r

) .

i The flash is not popped up.
i The camera is set to Landscape in Scene

position mode.

i The subject is too far away.

i Your finger was covering the flash/flash

control sensor.

Scene position mode is selected.

i The lens is dirty.
i The photographed subject was too dark.

i You photographed scenery with Macro

mode selected.

i You took a close-up shot without selecting

Macro mode.

i You are shooting a subject that is not

suited to autofocusing.

The picture was taken with a slow shutter
speed (long exposure) in a high-temperature
environment.

The xD-Picture Card contact area is soiled.

i Load new or fully charged batteries.
i Load the batteries in the correct direction.
i Close the battery cover correctly.

i Plug the adapter back in.

Load new or fully charged batteries.

i Put the batteries in your pocket or another

warm place to heat them and then load
them into the camera just before you take
a picture.

i Wipe the battery terminals with a clean,

dry cloth.

i Load new or fully charged batteries.
i Use the rechargeable battery discharging

function to restore the rechargeable
batteries to full capacity.

i Insert an xD-Picture Card.
i Insert a new xD-Picture Card or erase

some unwanted frames.

i Format the xD-Picture Card on the

camera.

i Wipe the xD-Picture Card contact area

with a clean dry cloth.

i Insert a new xD-Picture Card.
i Turn the camera on.

i Load new or fully charged batteries.

Photography mode is changed to “

B

” or

“

s

”.

i Pop up the flash.
i Select another Scene position or change

the Photography mode.

i Move to within the effective flash range

before taking the picture.

i Hold the camera correctly.

The flash settings are restricted because the
camera settings are tailored to the scene
being shot. Change the Photography mode
for a wider range of flash settings.

i Clean the lens.
i Try standing about 2 m (6.6 ft.) from your

subject to take the picture.

i Cancel Macro mode.

i Select Macro mode.

i Use AF/AE lock to take the picture.

This is a characteristic of CCDs and does
not indicate a camera fault.

Wipe the xD-Picture Card contact area with
a clean dry cloth.