Fujifilm A200 Manual Do Utilizador
(Special USB)
socket
socket
AC power adapter
Camera
83
7
DATE/TIME
DATE/TIME
USB MODE
POWER SAVE
POWER SAVE ON
ON
IMAGE DISPLAY
IMAGE DISPLAY OFF
OFF
SET
SET
PC CAM
SET−UP
SET−UP
BACK
BACK
BACK
OK
OK
OK
Plug the AC power adapter connector into the
DC IN 3V socket on the camera and then plug
the adapter itself into the main power outlet.
DC IN 3V socket on the camera and then plug
the adapter itself into the main power outlet.
1. Slide the power switch to the side to turn
the camera on.
2. Set the “USB MODE” setting in the
“SET–UP” menu to “PC CAM” (
➡P.64, 65).
3. Slide the power switch to the side to turn
the camera off.
✽Select Macro mode for close-up shots (➡P.27).
Although the “
E
” icon is not displayed.
4. Switch your PC on.
5. Use the special USB cable to connect the
5. Use the special USB cable to connect the
camera to your computer.
6. Switch the camera on.
Always use the prescribed procedure when
disconnecting or switching off the camera
(
disconnecting or switching off the camera
(
➡P.86).
✽Take care to ensure that the special USB cable is
connected the correct way around and that the plugs
are pushed fully into the connection sockets.
are pushed fully into the connection sockets.
If you are using a Windows PC, the driver
settings are automatically specified when
installation ends. Just wait a few moments.
settings are automatically specified when
installation ends. Just wait a few moments.
7.3 Use at PC-CAM mode
USB
socket
socket
PC
✽ Sold separately