Fujifilm 50i Manual Do Utilizador

indows

W
indows

6. Display switches to the capture window and the live image is

displayed. If the live image does not appear, click the Live
button

✽

Recording has not yet started.

7. Use the Drives button

2 to select “USB PC Camera”.

8. Click the Record button

3 to start recording.

9. Click the Record button

3 again to end recording.

✽

The recorded images are not saved to a file.

■ To check the images
Click the Play button

■ To save the images to a file and return to the Album window

1. When you click the [album] button, the Save dialog box

opens. Specify the save destination and click the [OK] button.

2. When the album storage confirmation dialog box appears,

click the [OK] button.

• Always use the correct procedure when removing the camera from the cradle or

switching the camera off.

• Do not perform any of the following when the camera is connected to a PC as this

may cause the PC to hang:
Remove the camera from the cradle / Disconnect the USB cable or AC cable / Touch
the camera controls (power switch, control buttons or lens cover) / Connect the AV
cable

NOTE

Capturing Live Images

1. Place the camera in the cradle and switch the camera on with

the lens cover open. (/ P.20)

2. If FinePixViewer starts up, quit FinePixViewer.

3. In the “Start” menu, select “Programs” / “ArcSoft

VideoImpression” / “ArcSoft VideoImpression 1.6”.

4. When the startup screen appears,

click the [new] button.

5. When the album window opens,

click the [capture] button.

3. When you click the [save] button, the Save dialog box

appears. Specify the save location, file name, etc. and save
the movie file.

• If you leave the mouse pointer positioned over a button or image for a few seconds,

information about that button or image is displayed.

• In any window, you can access the online help by clicking “?”.
• In addition to “MPEG”, you can choose from a wide range of formats for saved files.

TIP