Fujifilm A403 Manual Do Utilizador

●

To set the date and time later, press the “BACK”
button.

●

If you do not set the date and time, this confirmation
screen will appear each time you switch the camera on.

When you first switch the camera on, the date is
cleared. Press the “MENU/OK” button to set the
date and time.

To switch the camera on and off, slide the power
switch sideways. When you switch the camera
on, the viewfinder lamp lights (green).

●

Take care not to touch the lens when you switch the
camera on as the lens cover opens when the
camera is switched on.

0

1

0

2

◆

◆

When you push the xD-Picture Card into the
slot and then slowly remove your finger, the
lock is released and the xD-Picture Card is
pushed out.
You can then pull the xD-Picture Card the
rest of the way out.

1 Push the xD-Picture Card firmly into the 

xD-Picture Card slot as far as it will go.

2 Close the battery cover.

●

If you open the battery cover while the camera is still
switched on, the camera is automatically switched
off to protect the xD-Picture Card.

●

The xD-Picture Card will not slide fully into the slot if
it is inserted facing the wrong way. Be careful not to
apply undue force to the xD-Picture Card.

●

When storing xD-Picture Card, always use the anti-
static case provided.

●

Take care not to remove your finger too quickly
after the lock is released, as the card may
spring completely out of the slot.

ＤＡＴＥ／ＴＩＭＥ

ＤＡＴＥ／ＴＩＭＥ

 ＮＯＴ ＳＥＴ

ＮＯＴ ＳＥＴ

ＯＫ

ＯＫ

ＢＡＣＫ

ＢＡＣＫ

ＳＥＴ

ＳＥＴ

ＮＯ

ＮＯ