Fujifilm BL00677-200(1) Manual Do Utilizador

80

[SHOOTING MENU]

You can change the white balance for a photographed image 
by using colored paper instead of white paper.

• In AUTO mode, the correct white balance may not be 

achieved for subjects such as close-ups of people’s 
faces and pictures taken under a special light source. 
Select the correct white balance for the light source.

• When the flash fires, the white balance (except for 

custom white balance) setting for the flash is used. 
Consequently, to achieve a particular effect, the flash 
mode should be set to Suppressed flash (

➝p.67).

• The specified custom white balance is retained until it is 

reset. This setting is retained even if the batteries are 
removed.

• The color tones may vary depending on the shooting 

conditions (light source, etc.).

• After taking the picture, check the image color (white 

balance).

• Explanation of Terms “White Balance” (

➝p.157)

• When [

 AUCTION MODE] is selected, custom white 

balance cannot be set.

 and .)

Use this mode to reduce the time required for focusing 
when pressing the shutter button down halfway.
It is useful to avoid missing snapshot opportunities.

[

 EVF/LCD MODE] in the [U SET-UP] menu is 

automatically set to 60fps (

➝p.156).

With [HIGH-SPEED SHOOTING] set to [OFF]
Wide-angle: approx. 70 cm (2.3 ft.) to infinity
Telephoto: approx. 1.5 m (4.9 ft) to infinity
With [HIGH-SPEED SHOOTING] set to [ON]
Wide-angle: approx. 1 m (3.3 ft.) to infinity
Telephoto: approx. 1.5 m (4.9 ft) to infinity

• When taking pictures while the [HIGH-SPEED 

SHOOTING] mode is set to [ON], the batteries will run 
down more quickly.

• When setting . Sport mode, the camera sets to 

[HIGH-SPEED SHOOTING] mode automatically.

Set the exposure 
compensation again, using 
a negative value (–) when 
[OVER] appears and a 
positive value (+) when 
[UNDER] appears (

➝p.63).

Setting the menu (

➝p.72)