Panasonic DMC-TZ7 Manual Do Utilizador

110   

VQT1Z93

VQT1Z93

   111

The DMC-TZ6/DMC-TZ65 does not support VIERA Link.

 

 Power  OFF

     The camera’s power can also be switched off when switching the television’s power 

off with the remote control.

 

 Automatic input select

  • 

 

This function automatically switches the television input to the camera screen 
whenever the camera’s power is switched on while it is connected via the HDMI mini 
cable. The television can also be switched on via the camera from standby mode (if 
‘Power on link’ on the television is set to ‘ON’).

  • 

 

The input setting may not be able to be changed automatically with certain television 
HDMI sockets. In this case, please change the input setting with your television’s 
remote control (consult your television’s operating instructions for details).

  • 

 

Refer to P.120 if VIERA Link (HDMI) does not function correctly.

  If you are unsure whether or not the TV you are using are compatible with VIERA Link, 

read the operating instructions for the devices.

  If the ‘VIERA Link’ setting on the camera (P.26) is ‘ON’, operations via the camera 

buttons will be limited.

  Ensure that the television you are connecting to has been set up to enable VIERA Link 

(HDMI) (consult your television’s operating instructions for details).

  If you do not wish to use VIERA Link (HDMI), turn the camera’s ‘VIERA Link’ setting 

(P.26) ‘OFF’.

  ‘HDMI MODE’ (P.25) ‘1080i’ is only effective in the following cases:

 • 

The   tab on the TV screen is selected

  • SLIDESHOW ‘PICTURE ONLY’ is selected
 • 

 

SLIDESHOW ‘CATEGORY SELECTION’ is selected (except for   Travel date)
In all other cases, images will be outputted as ‘720p’.

  If the   tab on the TV screen is selected while ‘HDMI MODE’ (P.25) is set to ‘AUTO’ or 

‘1080i’, the screen will go back before the single picture playback display resumes. This 
is not a fault.

  If the   tab on the TV screen is selected, it will not be possible to select either   

(Travel date), 

 (AVCHD Lite), or   (MOTION JPEG) in SLIDESHOW ‘CATEGORY 

SELECTION’.

Use your television’s remote control to operate the camera.
(1) Multiple playback
     Press the red button on your television’s remote 

control to switch between the types of data to be 
played.
•  Playback data type options can be scrolled as follows: 

‘ALL’ →   → 

 →   → ‘ALL’

     Use ▲▼◄► to select image, and press ‘OK’ to display 

as single image.

     Slideshow settings and other options can be accessed by 

pressing the ‘OPTION’ button.

(2)  Single image display
  Press 

   

  If single image display has been accessed from ‘ALL’ or 

 

Press ‘OK’ to start (3) slideshow.

   

  If single image display has been accessed from 

 or   

Press ‘OK’ to start motion picture playback.
Press ◄► to rewind/fast forward, or ▼ to stop 
playback.

Operation icons

(3) Slideshow 
    Press ‘OK’ to start/pause the slideshow.
     Press◄► while paused to scroll between motion 

To play motion picture audio during slideshows when 
‘ALL’ has been selected, press ‘OPTION’, and in the 
‘Slideshow’ settings, set ‘Effect’ to off and ‘Audio’ to on.

Operation icons can be hidden by pressing ‘RETURN’. 
When operations are hidden, they can be re-displayed 
by pressing ‘OPTION’.

Operation icons