Fujitsu C150-E049-02EN Manual Do Utilizador
M3099GX/GH OEM Manual
4-17
BASIC
OPERATION
OPERATION
3 Disconnect the two relay
connectors on the roller
ASY. (front: 3 pin, back:
2pin)
ASY. (front: 3 pin, back:
2pin)
4 Push the two levers (green)
towards each other to dis-
engage with the upper
locking holes and lower
down the two levers until
they engage with the two
levers locking holes.
engage with the upper
locking holes and lower
down the two levers until
they engage with the two
levers locking holes.
5 Lift the document sensor
unit and keep it at the
upper position with one
hand and pull the roller
ASY out with the other
hand.
upper position with one
hand and pull the roller
ASY out with the other
hand.
6 Install a new roller ASY and
return the document sensor
unit to its original position.
unit to its original position.
7 Push the two levers (green)
towards each other to dis-
engage with the lower
locking holes and lift them
up until they engage with
the two upper locking
holes.
engage with the lower
locking holes and lift them
up until they engage with
the two upper locking
holes.
8 Connect the two relay
connectors on the roller
ASY. (front: 3 pin, back:
2 pin)
ASY. (front: 3 pin, back:
2 pin)
9 Close the upper transport
unit. (See page 4-2)
Lever (green)
Roller ASY
Roller ASY
Document sensor unit
Lever (green)
Roller ASY