Fujitsu C150-E049-02EN Manual Do Utilizador
M3099GX/GH OEM Manual
C-2
5 Lift the document sensor
unit and keep it at the upper
position with one hand and
pull the roller ASY out with
the other hand.
position with one hand and
pull the roller ASY out with
the other hand.
6 Move the guide on the
hopper table completely to
the end.
the end.
7 Hold both ends of the guide
plate and press them down
to remove the guide.
to remove the guide.
8 Adjust the separation
pressure by using the separa-
tion pressure adjustment
lever according to paper feed
error as follows:
tion pressure adjustment
lever according to paper feed
error as follows:
• Slip feed:
Turn clockwise by 45
Turn clockwise by 45
°
. (In-
crease the separation pressure.)
• Double feed:
Turn counter-clockwise by 45
• Double feed:
Turn counter-clockwise by 45
°
.
(Decrease the separation pres-
sure.)
Notice:
If the paper feed error reccur,
try this adjustment again until
the lever stops.
sure.)
Notice:
If the paper feed error reccur,
try this adjustment again until
the lever stops.
Hopper table
Guide
Guide plate
Separation pressure
adjustment lever
adjustment lever
Slip feed
Double feed