Panasonic PV-DV953 Manual Do Utilizador
42
1, 2
F 7
640
PICTURE
1
4
MPEG4
2
VOICE
3
3
M E N U
5
4
PHOTO
SHOT
SHOT
CARD MODE
TAPE
CARD
5
6
PUSH
SHUTTER/IRIS/
VOL/JOG
VOL/JOG
A
1
2
1
3
Special Features
Using a Memory Card
An SD Memory Card or MultiMediaCard can be used to record files or play
back files.
≥Use a genuine SD Memory Card or MultiMediaCard manufactured by
back files.
≥Use a genuine SD Memory Card or MultiMediaCard manufactured by
Panasonic only.
ª Inserting a Memory Card
Before inserting a Memory Card, be sure to turn off the Palmcorder.
1
Open the Card Slot Cover.
2
While holding the Memory Card with its cut corner
A
facing
right, insert it into the Card Slot.
3
Close the Card Slot Cover securely.
ª Removing the Memory Card
Open the Card Slot Cover, press the center of the Card and then pull it
straight out.
≥After removing the Card, close the Card Slot Cover.
≥The Palmcorder or the Card may be damaged if the Card is forced out when
straight out.
≥After removing the Card, close the Card Slot Cover.
≥The Palmcorder or the Card may be damaged if the Card is forced out when
the Card is fully inserted.
ª [ACCESS] Lamp
While the Palmcorder is accessing the Card (reading, recording, playback,
erasing, moving of images), the [ACCESS] Lamp
erasing, moving of images), the [ACCESS] Lamp
1
lights up.
≥While the [ACCESS] Lamp is on, never attempt to: pull out the Card, to turn
off the Palmcorder power, or switch the [TAPE/CARD/CARD MODE]
Selector. Such actions will damage the Card and cause the Palmcorder to
malfunction.
Selector. Such actions will damage the Card and cause the Palmcorder to
malfunction.
~~~~~~~~~~~~~~~~~~~~~~~~
Recording on the Memory Card
3 kinds of data can be recorded by selecting with the [TAPE/CARD/
CARD MODE] Selector. When recording a still picture, slide the [TAPE/
CARD/CARD MODE] Selector until the [PICTURE] Indication
CARD MODE] Selector. When recording a still picture, slide the [TAPE/
CARD/CARD MODE] Selector until the [PICTURE] Indication
1
appears
(Card PhotoShot), when recording a moving picture, slide the [TAPE/CARD/
CARD MODE] Selector until the [MPEG4] Indication
CARD MODE] Selector until the [MPEG4] Indication
2
appears (MPEG4
Recording), when recording voice, slide the [TAPE/CARD/CARD MODE]
Selector until the [VOICE] Indication
Selector until the [VOICE] Indication
3
appears (Voice Recording).
≥For other notes, see page 70.
ª Card PhotoShot
Still pictures can be recorded on the Memory Card from the Palmcorder lens
as well as from scenes that have already been recorded on a cassette.
The size of images that are recorded using this Palmcorder is approximately
3,000,000 pixels. Recording of images with a size that is larger than a million
pixels is called mega-pixel still-picture recording. Compared to images of
normal recording, images that are created by mega-pixel still-picture
recording can be printed out more clearly.
as well as from scenes that have already been recorded on a cassette.
The size of images that are recorded using this Palmcorder is approximately
3,000,000 pixels. Recording of images with a size that is larger than a million
pixels is called mega-pixel still-picture recording. Compared to images of
normal recording, images that are created by mega-pixel still-picture
recording can be printed out more clearly.
Recording from the Palmcorder Lens (CAMERA Mode)
1
Slide the [TAPE/CARD/CARD MODE] Selector to [CARD].
2
Slide the [TAPE/CARD/CARD MODE] Selector to
[CARD MODE] until the [PICTURE] Indication appears.
[CARD MODE] until the [PICTURE] Indication appears.
≥Remaining Number of Card PhotoShot pictures
4
.
3
Set [CAMERA FUNCTIONS] >> [CARD SETUP] >>
[PICTURE SIZE] >> [2048
[PICTURE SIZE] >> [2048
t1496] or [640t480].
4
Center the subject in the focus area
5
on the screen.
≥In Auto Focus Mode, the focus indication
6
is lit when the subject is in
focus. (Green: in focus, White: roughly in focus)
5
Press the [PHOTO SHOT] Button.
≥The [
] Indication will light in red.
≥For other notes, see page 70.
Concerning Low Light Shot
When recording dark scenes, set the [LOW LIGHT SHOT] of the
[CARD SETUP] Sub-Menu to [AUTO]. (When the shutter speed is 1/30, Low
Light Shot is activated, and the [
[CARD SETUP] Sub-Menu to [AUTO]. (When the shutter speed is 1/30, Low
Light Shot is activated, and the [
4
CARD
] Indication appears.)
≥When [AUTO] is set for Low Light Shot, the brightness of the moving picture
may suddenly be changed depending on the scene to be shot.
PICTURE
PV-DV953P.book 42 ページ ２００３年１月１６日 木曜日 午後６時５４分