Hitachi hdc-401ex Manual Do Utilizador

82

81

Check to see if the camera power is turned off. 
If the camera is still on, press the power switch
to turn off the power.

Plug the larger connector of the USB cable into the USB port on the
computer, and firmly insert the smaller connector into the USB
terminal on the camera.

The HDC-401EX is recognized as a removable disk. 

A removable disk is displayed under My Computer.

Press the power switch to turn on the
camera power.

●

If your HDC-401EX was connected to the

computer for the first time, the New Hardware
wizard is displayed. It will quickly navigate you
through the necessary steps so that the
computer can automatically recognize the HDC-
401EX. Wait for a while until the setting is
completed and the wizard disappears.

●

If the New Hardware Search wizard screen is 
displayed, click Next and follow the on-screen

instructions. 

When the Search Wizard is Completed screen

is displayed, click Finish.

●

In Windows XP, the OS

,

s

Automatic Recovery 

wizard is displayed. 

Click Do not do anything

and then click OK.

Turn on the power.

●

The LCD monitor shows USB Mode, and images and other data won

,

t be displayed.

●

The power off time function is disabled.

●

Power won

,

t be supplied to the HDC-401EX from the computer.

●

Do not disconnect the USB cable or touch the camera (interface cover, control panel,

shutter button, etc.) while the HDC-401EX is communicating with the computer.

Doing so may damage the stored data. 

When disconnecting the HDC-401EX, be sure to operate in accordance with Removing 

the HDC-401EX          .

Turn off the power.

Smaller connector

Larger connector

●

If your computer is running Windows 98/98SE, you must perform the
procedure specified under Installing the HDC-401EX Driver in the

before you can connect your HDC-401EX to the computer. 

●

Before connecting the HDC-401EX to the computer, be sure to turn off the 

camera power. 

●

When connecting the HDC-401EX to the computer, be sure to check the

remaining battery power. Although the Power Off Time function is disabled
while the camera is connected to the computer, the camera will turn off if the
batteries are exhausted. If the camera is turned off while connecting, the 
computer may not operate correctly or recorded data may be damaged.
If the camera is to remain connected to the computer for a long period of 
time, use of the AC adapter (sold separately) is recommended. 
Using the AC Adapter          .

Connecting

the

HDC-401EX

to
the

C

omputer

Using

the
USB

C

able

Operations

While

Connected

to
a

C

omputer