Hitachi DZ-GX3100A Manual Do Utilizador

English

While holding down the gray button at the right 
of power switch, set the switch according to 
each recording function:

Power ON status

During playback, set the power switch to “O” 
or “N” when using disc, or set it to “P” when 
using card.
Turn the switch while holding down the gray 
button at the right of switch.

• Once you turn the DVD video camera/recorder on to 

let it recognize the disc, you can immediately record 
or play back by turning the DVD video camera/
recorder on again. However, if a long time has 
elapsed after the disc was inserted, it will take some 
time for the DVD video camera/recorder to start 
because it must recognize the disc again (see 
“Troubleshooting” on page 139).

• It will take some time for the DVD video camera/

recorder to display the Disc Navigation screen after 
power is turned on.

• When the DVD video camera/recorder is turned on, 

the self-diagnosis function will work and a message 
may appear. In this case, refer to “Trouble Messages” 
on page 133 and take corrective action.

The DVD video camera/
recorder will turn off

P

To record still on SD 
memory card

O

To record movie on DVD-
RAM/DVD-RW/DVD-R/
+RW disc

N

To record still on DVD-
RAM disc

OFF

OFF

Power switch