Lucent Technologies 555-670-111 Manual Do Utilizador
MERLIN LEGEND Communications System Release 7.0
System Programming
System Programming
555-670-111
Issue 1
April 1999
Programming Special Characters
H-3
MLX-10 and MLX-5 Nondisplay Telephones
H
MLX-10 and MLX-5
Nondisplay Telephones
Nondisplay Telephones
4
Some dialing sequences need special characters. For example, the user presses
Hold to insert a Pause character after the dial-out code in a dialing sequence to
allow the system to seize an outside line before dialing the number. A Pause
character can also be used to separate a telephone number from an extension
number.
Hold to insert a Pause character after the dial-out code in a dialing sequence to
allow the system to seize an outside line before dialing the number. A Pause
character can also be used to separate a telephone number from an extension
number.
Table H-3.
Special Characters for MLX-10 and MLX-5 Nondisplay Telephones
Press...
Means...
Drop
Stop. Halts the dialing sequence to allow for system
response.
response.
Hold
Pause. Inserts a 1.5-second pause in the dialing
sequence. Multiple consecutive pauses are allowed.
sequence. Multiple consecutive pauses are allowed.
Conf
Flash. Sends a switchhook flash. Must be the first entry in
the dialing sequence.
the dialing sequence.
#
End of Dialing for extension programming only. Used
at the end of a dialing sequence to indicate that the user
has finished dialing or to separate one group of dialed
digits from another.
at the end of a dialing sequence to indicate that the user
has finished dialing or to separate one group of dialed
digits from another.
##
End of Dialing. Used to signal the end of the dialing
sequence or to separate one group of dialed digits from
another.
sequence or to separate one group of dialed digits from
another.