Crimestopper Security Products SP-300 Manual Do Utilizador

TABLE OF CONTENTS

Installation Cautions & Warnings..…….……………………………….……………………………………….……2

Control Module & Component Mounting ……………...……………………..……………………….…….…..…..3

LED and Valet Programming Button………………………………………………………………………………….3

Wiring………………………………………………………………………..…………………..………….….…….….4-5

SHOCK SENSOR Wiring…….…………….………….….…..…………………………………………………………6

Power Door Lock Wiring……………………………………………………….………………………….…...….…6-7

Transmitter Programming………………………………………………………………………………………………8

Vehicle Programming..…………………..………………………….…….........................................................9

Option Programming…………………………………………….…….………………….…….…………...….…10-13

Antenna Diagram..………………………………………………..……………………………..……………..………14

Wiring Diagram..…………………………………………………..……………………………..……………..………15

Data Port Diagram …………………………………………………………………………………………………..…16

INSTALLATION CAUTIONS & WARNINGS

BEFORE BEGINNING, check all vehicle manufacturer cautions and warnings regarding electrical service (AIR
BAGS, ABS BRAKES, ENGINE COMPUTERS, BATTERY etc.).

WE RECOMMEND the use of a VOLT/OHM METER to test and verify wiring circuits. Test lights or illuminated
probes can cause damage to on-board computer or engine management systems.

DO NOT exceed maximum output ratings.

WE RECOMMEND that the MAIN SYSTEM FUSE be REMOVED before jump starting, using a battery
charger, or changing the battery. A voltage surge or high boost condition could damage alarm circuits.

DO NOT ROUTE ANY WIRING THAT MAY BECOME ENTANGLED with brake, and gas pedals, steering
column, or any other moving parts in the vehicle.