Honeywell H8908C/D Manual Do Utilizador

H8908A/B HUMIDISTAT; H8908C/D DEHUMIDISTAT

69-1341EF—07

DUCT INSTALLATION

1. Choose a location on the duct.

Fig. 3. Duct installation locations.

2. Apply sticker template to duct and drill holes for

mounting screws. Cut along the dotted line of the

template with metal shears or tin snips.

Fig. 4. Drill and cut holes in duct.

3. Run two-fan, low-voltage wire to the mounting loca-

tion on the duct. See Fig. 5.

IMPORTANT

Use rated 18-22 gauge wire. Leave approximately
6 in. of wire to properly connect the humidistat.

Fig. 5. Run wire to the mounting location.

REMOTE MOUNT
INSTALLATION

1. Choose a location in the living area.

NOTE: Select a location clear of drafts or excessive

humidity. Avoid mounting near doors or win-

dows, or in bathrooms or kitchens. See Fig. 6.

Fig. 6. Choose a location in the living area.

2. Cut 1 in. diameter wire hole in wall.
3. Run two-fan, low-voltage wire to the mounting loca-

tion in the living area.

IMPORTANT

Use rated 18-22 gauge wire. Leave approxi-
mately 6 in. of wire to properly connect the humi-
distat.

Fig. 7. Run wire to the mounting location.

ALTERNATE LOCATION

RETURN
AIR

6 in. (152 mm)
MINIMUM

15 in. (381 mm)
MINIMUM

BEST
LOCATION

RETURN AIR DUCT

M13369

M24800

M24720

TWO-FAN 18-22 GAUGE WIRE

SUPPLY

RETURN

M24718

M24721