Valor Auto Companion Inc. 739DVP Manual Do Utilizador
28
Programmable Remote Control
Your fi replace remote control helps you get the comfort, convenience and aesthetics you want from
your gas fi replace. The remote controls your fi replace in different ways.
your gas fi replace. The remote controls your fi replace in different ways.
IMPORTANT: BEFORE YOU BEGIN, please note that on this system, the settings of time, temperature
and automatic ON/OFF can only be programmed when the function display is fl ashing. Be patient
when programming as it can take a few seconds to set.
and automatic ON/OFF can only be programmed when the function display is fl ashing. Be patient
when programming as it can take a few seconds to set.
Setting the time
The fi rst thing to do is to set the time.
With your thumb, hold down both the AUTO and TIMER buttons until F
fl ashes. Let go.
Note the digital clock on the bottom right hand corner. The ▲ button sets
the hour; the ▼ button sets the minutes. Set the time.
Note: You must start setting the time while the F is fl ashing. If it stops
fl ashing, go back to 1.
The display shows °C/24-hour or °F/12-hour. To change the temperature/
hour display, press on the AUTO button while the display fl ashes.
Let go and wait until the fl ashing stops. The remote shows the time you
set. It also shows the current temperature.
fl ashes. Let go.
Note the digital clock on the bottom right hand corner. The ▲ button sets
the hour; the ▼ button sets the minutes. Set the time.
Note: You must start setting the time while the F is fl ashing. If it stops
fl ashing, go back to 1.
The display shows °C/24-hour or °F/12-hour. To change the temperature/
hour display, press on the AUTO button while the display fl ashes.
Let go and wait until the fl ashing stops. The remote shows the time you
set. It also shows the current temperature.
Setting the temperature
Use this setting when you come in and want to enjoy a specifi c temperature.
Push the AUTO button until a number and F fl ash. Let go.
While it is still fl ashing, push the ▲ and ▼ buttons to the temperature
you want. Let go.
While it is still fl ashing, push the ▲ and ▼ buttons to the temperature
you want. Let go.
Your fi replace will reach that temperature and the remote will check the
temperature every fi ve minutes, adjusting the amount of fuel needed to give
you a steady, even heat.
temperature every fi ve minutes, adjusting the amount of fuel needed to give
you a steady, even heat.
1.
2.
3.
4.
1.
2.
2.