Monessen Hearth DEB20 Manual Do Utilizador
24
44D0060
HIGH
LOW
26D
3317
THERMOST
AT
SETTI
NG
ELECTRICAL WIRING (MILLI-VOLT)
5. Route wiring harnesses through large hole on side of unit. Mount bracket to side of unit with screw provided. See Figure
22.
6. Attach wiring harness to either TP/TH and TH on control valve or to existing wiring harness with two (2) 0.250" male
spade terminals for remote or t-stat option. See Figures 22 and 23.
7. Install knob to shaft of t-stat sensor. See Figure 22.
8. Place thermo bulb in front of the firebox for incoming air.
8. Place thermo bulb in front of the firebox for incoming air.
Figure 23 - Attaching Wiring Harnesses to Control Valve
Wiring Harnesses
TH
TP/TH
Figure 22 - Installing T-Stat Sensor to DEB Base
with Screw Provided
Knob
Thermo Bulb
Screw
T-Stat
Sensor and
Bracket
Wiring Harnesses