Mitsubishi PJZ012A087B Manual Do Utilizador
6
1
Press
TIMER button.
2
Press
▼ button once.
“
”
Æ “
”
3
Press
SET button.
[EXAMPLE] “
” flashes,
“
” lights.
4
Press
▲ or ▼ button.
The display changes as below. Set as you like.
“
“
”
⇔ “
” ~ “
”
⇔ “
”
5
Press
SET button.
Sleep timer has been set.
If the Sleep timer is set when the unit stops, it starts operating.
After “
If the Sleep timer is set when the unit stops, it starts operating.
After “
” is displayed in the display area, it returns to
step
2
.
<When “Ten hours later OFF” is set >
“
” (lights)
“
” (lights for two seconds)
È
“
” (lights)
“
” (lights)
The time left is displayed by one hour as time passes off after the
setting.
When the setting time elapses, the unit stops operating.
The unit stops operating at each setting time once it is set.
setting.
When the setting time elapses, the unit stops operating.
The unit stops operating at each setting time once it is set.
6
Press
ON/OFF button.
The timer mode is
finished.
3•5
2•4
1
6
1
Press
TIMER button.
2
Press
▼ button twice.
[
]
Æ [
]
Æ [
]
3
Press
SET button.
[EXAMPLE] “
” flashes,
“
” lights.
4
Press
▲ or ▼ button.
Set the time at which you want to stop the operation.
Set “Hour”
•
If you press
▲ or ▼ button for a while, “Hour” display is changed
by one hour, and stops when you stop pressing.
Set “Minute”
•
If you press
▲ or ▼ button, the display increases or decreases
by ten minutes.
5
Press
SET button.
OFF timer has been set.
After “
After “
” is displayed in the display area, it returns
to step
2
.
<If set to 6:00 PM >
“
” (lights)
“
” (lights for two seconds)
↓
“
”(lights)
“
” (lights)
The unit stops operating at 6:00 PM.
The time display is also turned off.
The time display is also turned off.
6
Press
button.
The timer mode is finished.
The unit stops operating at the setting time.
This setting is effective for only once.
This setting is effective for only once.
3•5
2•4
1
6
If you start the operation while you are setting the OFF
timer, operate the air conditioner before setting of timer.
timer, operate the air conditioner before setting of timer.
SLEEP TIMER MODE
OFF TIMER MODE
• If you press
button while timer mode
is operative, timer mode is canceled and the
display will return to the original display.
display will return to the original display.
• If you do not press any button for several minutes
after entering the timer mode, the timer mode
ends and returns to the original display.
ends and returns to the original display.
NOTE
• If you press
button while timer mode
is operative, timer mode is canceled and the
display will return to the original display.
display will return to the original display.
• If you do not press any button for several minutes
after entering the timer mode, the timer mode
ends and returns to the original display.
ends and returns to the original display.
ATTENTION
After certain period has elapsed, the unit stops operating.
• Sleep timer
The unit stops operating at each setting time once it is set.
NOTICE
HOW TO PERFORM THE TIMER OPERATION
< WIRED REMOTE CONTROL >
1
Press
TIMER button.
It enters the timer mode.
“Current day of the week” and “Current time” are displayed.
“Current day of the week” and “Current time” are displayed.
Display area :
[
]
[
]
[
]
2
Press
SET button.
The display area shows : [
]
(
▼ flashes)
[
] (current time)
[
]
3
Press
▲ or ▼ button.
Align the
▼ mark above the day of the week to the current
day of the week.
Press
▲ and ▼ mark to move to the right and the left respectively.
If you press the
RESET button, the remote control will return to
the previous screen and display “
”.
4
Press
SET button.
The day of the week is fixed, and the flashing of
▼ mark turns to
lighting stably.
“current time” is displayed by flashing in the ON timer display area,
and “
“current time” is displayed by flashing in the ON timer display area,
and “
” is displayed in the display area.
5
Press
▲ or ▼ button.
Set to the current time.
If you press the
RESET button, the remote controller return
to step
1
.
6
Press
SET button.
The flashing for time display turns to lighting stably, and
“
“
” is displayed to show that the current time is set.
Two seconds later, it returns to step
1
, and “
” is
displayed.
7
Press
button.
The timer mode is finished.
2
3
1
•
•
4
5
•
6
7
Timer operation is performed base on the time set by the steps described in this section. Make sure to set the
time to the current time correctly.
time to the current time correctly.
SETTING THE TIME
• If you press
button while timer mode is operative,
timer mode is canceled and the display will return to the
original display. Note that the setting which has not been
completed is canceled.
original display. Note that the setting which has not been
completed is canceled.
• If you do not press any button for several minutes after
entering the timer mode, the timer mode ends and returns
to the original display.
to the original display.
ATTENTION
PJZ012A087B.indd 6
PJZ012A087B.indd 6
2014-3-4 10:28:34
2014-3-4 10:28:34