GE AGE12 Manual Do Utilizador

Página de 20
IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
WARNING!
For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock
or personal injury.
Use this appliance only for its intended
purpose as described in this Owner’s
Manual. 
This air conditioner must be properly
installed in accordance with the Installation
Instructions before it is used. 
Never unplug your air conditioner by
pulling on the power cord. Always grip 
plug firmly and pull straight out from 
the receptacle. 
Repair or replace immediately all electric
service cords that have become frayed 
or otherwise damaged. Do not use a cord
that shows cracks or abrasion damage 
along its length or at either the plug or
connector end. 
Turn the mode control to OFF and unplug
your air conditioner before making any
repairs or cleaning. 
NOTE: We strongly recommend that any servicing 
be performed by a qualified individual.
For your safety…do not store or use
combustible materials, gasoline or other
flammable vapors or liquids in the vicinity 
of this or any other appliance. 
SAFETY PRECAUTIONS
Do not, under any circumstances, cut or remove
the third (ground) prong from the power cord. 
For personal safety, this appliance must be
properly grounded.
The power cord of this appliance is equipped
with a 3-prong (grounding) plug which mates
with a standard 3-prong (grounding) wall
outlet to minimize the possibility of electric 
shock hazard from this appliance.
Have the wall outlet and circuit checked by 
a qualified electrician to make sure the outlet 
is properly grounded.
Where a 2-prong wall outlet is encountered, 
it is your personal responsibility and obligation
to have it replaced with a properly grounded 
3-prong wall outlet.
The air conditioner should always be plugged
into its own individual electrical outlet 
which has a voltage rating that matches the
rating plate.
This provides the best performance and also
prevents overloading house wiring circuits
which could cause a fire hazard from
overheated wires.
See the Installation Instructions, Electrical
Requirements 
section for specific electrical
connection requirements. 
HOW TO CONNECT ELECTRICITY
Consumer Support
Tr
oubleshooting T
ips
Operating Instructions
Safety Instructions
Installation Instructions
2