Heat Controller MMC36TA-1 Manual Do Utilizador

Read completely, then follow step by step.

1. Does not have any heat or steam near the

unit.

2. Select a place where there are no obstacles

in front of the unit.

3. Make sure that condensation drainage can be

conveniently routed away.

4. Do not install near a doorway.
5. Ensure the unit is unobstructed, allow proper

space on all sides according to the arrows
and distance measurements in the figures.

6. Use a stud finder to locate studs to prevent

unnecessary damage to the wall.

1. If an awning is built over the unit to prevent

direct sunlight or rain exposure, make sure
that heat radiation from the condenser is not
restricted.

2. Ensure the unit is unobstructed, allow proper

space on all sides according to the arrows
and distance measurements in the figures.

3. Do not place animals and plants in the path

of the warm air.

4. Take the air conditioner weight into account

and select a place where noise and vibration
are minimum.

5. Select a place so that the warm air and sound

from the air conditioner does not disturb
neighbors.

If the outdoor unit is installed on a roof
structure, be sure to level the unit. Ensure the
roof structure and anchoring method are
adequate for the unit location. Consult local
codes regarding rooftop mounting.

More than 20 cm

(7.9 inch)

More than 10 cm

(3.9 inch)

More than 10 cm

(3.9 inch)

More than 2.4m

(8 ft)

more than 70 cm

(27.6 inch)

more than 30 cm

(11.8 inch)

more than 30 cm

(11.8 inch)

more than 60 cm

(23.6 inch)

more than 70 cm

(27.6 inch)

more than 60 cm

(23.6 inch)

more than 30 cm

(11.8 inch)

more than 30 cm

(11.8 inch)