Ariston System A 30 RFF Manual Do Utilizador

The boiler is delivered with pre-set values described

in menus 3 and 4.

All settings must only be changed by the installer or

a qualified person. To gain access to the setting

buttons please, open the front control panel cover

P) and follow the instructions below.

17. Adjustments and settings

DISPLAY

2nd digit

1st digit

3rd digit

4th digit

On/Off push button

Reset push button

Menu button

- button

+ button

Setting button

9 9

10 10

11 11

12 12

13 13

14 14

15 15

16 16

17 17

1818

1919

2020

2121

2222

Pressing the, comfort, reset, menu, +, -, or setting buttons will make the display light. The light will go out 30 seconds after the

last button has been pressed.

To gain access to the setting menus press

and

buttons together for 5 seconds.. Menu 1 is displayed on the 1st digit.

Changing the menu :

Press the Menu button

. The menu number is displayed for 3 seconds. Press the menu button to change to the next

Setting a parameter in a section :

Press the

button to change from between sections.

Note : When you arrive at the last section of a menu, pressing the

button will change to the the 1st section. When

you are at the first section, pressing the

button will change to the last section of the menu.

Changing section in a menu (available only for menu 3,4,5 and 6)

Press the setting button

to enter the modification mode, The 3rd and 4th digits will be flashing, press the

button to select the correct value then press the setting button to select this modification and to exit the setting mode. The

3rd and 4th digit stop flashing.

Recalling the basic configuration :

Select menu 3,4,5 or 6 then press the

and

buttons together for more than 5 seconds. The digits will flash CM for

a while to indicate that the operation is completed.

Clearing Menu 1 (default register) :

Select menu 1 then press the

and

buttons together for more than 5 seconds. The digits will flash CM for a while

to indicate that the operation is completed.

Note : To exit install mode, press the Menu button

for at least 3s. If no button is pressed for about 1 minute, the display

returns to user mode.