Ariston System A 30 RFF Manual Do Utilizador

1. Remove the casing as in step 18.1.1;
2. Pull off the connections. Then remove the pressure

switch by releasing it’s securing clip (see Fig. 103).

Fig. 103

1. Carry out step  18.4.6;
2. Remove the pressure gauge by releasing the two clips

V and pulling the pressure gauge out. (see Fig. 102)

Fig. 102

Fig. 106

Fig. 107

3. Release the three clips W2 and remove the

electrical box cover (see Fig. 107);

1. Carry out steps  18.1.1 and 18.1.2;
2. Remove the screw W1 from the electrical box (see

Fig. 106);

Fig. 105

Fig. 104

1. Unscrew the cap of the condensate trap (see Fig. 104)

2. Empty the condensate products and rinse the

condensate trap with clean water (see Fig. 105)

3. Reassemble in reverse order and fill the condensate

trap with 1/2 litre of water before restarting the boiler.