Honeywell T7200E Manual Do Utilizador
T7200D,E, T7300D,E,F AND Q7300 SERIES 2000 PROGRAMMABLE COMMERCIAL THERMOSTATS AND SUBBASES
63-4355—4
6
Fig. 5. Two T7047C Sensors and one T7047G Sensor
providing temperature averaging network for
T7300/Q7300 Thermostat/Subbase.
Fig. 6. Four T7047C Sensors providing temperature
averaging network for T7300/Q7300 Thermostat/Subbase.
Fig. 7. Five T7047G Sensors providing temperature
averaging network for T7300/Q7300 Thermostat/Subbase.
Fig. 8. Nine T7047C Sensors providing temperature
averaging network for T7300/Q7300 Thermostat/Subbase.
NOTE:
With the thermostat configured for a temperature
averaging network (remote and internal sensing), the
internal sensor has 50% authority of the averaged
temperature.
averaging network (remote and internal sensing), the
internal sensor has 50% authority of the averaged
temperature.
Mounting Subbase/Wallplate
The subbase/wallplate mounts horizontally on the wall or
a 2 in. by 4 in. wiring box. Position the subbase/wallplate
horizontally on the wall or on a 2 in. by 4 in. wiring box.
a 2 in. by 4 in. wiring box. Position the subbase/wallplate
horizontally on the wall or on a 2 in. by 4 in. wiring box.
1.
Position and level the subbase/wallplate.
NOTE:
A level wallplate is only for appearance. The
thermostat functions properly when not level.
thermostat functions properly when not level.
2.
Use a pencil to mark the mounting holes. See Fig. 9.
3.
Remove the subbase/wallplate from the wall and drill
two 3/16 inch holes in the wall (if drywall) as marked.
For firmer material such as plaster or wood, drill two
7/32 inch holes. Gently tap anchors (provided) into the
drilled holes until flush with the wall.
two 3/16 inch holes in the wall (if drywall) as marked.
For firmer material such as plaster or wood, drill two
7/32 inch holes. Gently tap anchors (provided) into the
drilled holes until flush with the wall.
4.
Position the subbase/wallplate over the holes, pulling
wires through the wiring opening.
wires through the wiring opening.
5.
Loosely insert the mounting screws into the holes.
6.
Tighten mounting screws.
M4839
T
T
SUBBASE
T
T
T7047C
T
T
T7047C
T
T
T7047G
M4840
T
T
T
T
SUBBASE
T7047C
T
T
T7047C
T
T
T7047C
T
T
T7047C
M4841
T
T
SUBBASE
T
T
T7047G
T
T
T7047G
T
T
T7047G
T
T
T7047G
T
T
T7047G
M4842
T
T
T
T
SUBBASE
T7047C
T
T
T7047C
T
T
T7047C
T
T
T7047C
T
T
T7047C
T
T
T7047C
T
T
T7047C
T
T
T7047C
T
T
T7047C