Honeywell TH5220D Manual Do Utilizador
Operating Manual
8
Auto Changeover (heat/cool)
Auto Changeover is a feature used in
climates where both air conditioning and
heating are used on the same day.When the
system is set to Auto, the thermostat
automatically selects heating or cooling
depending on the indoor temperature.
climates where both air conditioning and
heating are used on the same day.When the
system is set to Auto, the thermostat
automatically selects heating or cooling
depending on the indoor temperature.
Heat and cool settings must be at least 3
degrees apart.The thermostat will automatically
adjust settings to maintain this 3-degree
separation (called “deadband”).
degrees apart.The thermostat will automatically
adjust settings to maintain this 3-degree
separation (called “deadband”).
The 3-degree separation between heating
and cooling set temperatures is fixed, and
cannot be changed.
and cooling set temperatures is fixed, and
cannot be changed.
Press until screen
displays “Auto”
displays “Auto”
Note: The Auto system setting
may not appear, depending on
how your thermostat was
installed.
may not appear, depending on
how your thermostat was
installed.
System
Auto
Fan
Auto
Auto